GreenGuard Type VI 40 psi XPS Insulation Board

GreenGuard XPS Type VI 40 psi Insulation Board

For use as General Purpose Insulation for Roofing, Wall and Foundation Applications Requiring 40 psi Minimum Compressive Strength

GreenGuard extruded polystyrene (XPS) does not absorb moisture and retains its insulating properties over time, making it an ideal exterior insulation. With an R-Value of 5.0 per inch of thickness, the board increases the energy efficiency of your structures. Plus, it’s light weight, easy to handle, and easy to cut with a knife. GreenGuard Type VI 40 psi Insulation Board is designed for use in high load applications requiring compressive strength up to 40 psi. It meets ASTM C 578 Type VI requirements.

GreenGuard XPS Type VI 40 psi Vegetative Insulation Board

GreenGuard Type VI 40 PSI XPS

Product Information

Property Test Method Result
Nominal Thickness   2 / 3
Nominal Board Width (ft)
Nominal Board Length (ft)
 
4
8
Edge Profile   Square²
Property Type ASTM C 578 VI
Compressive Strength, Min. 
(psi@ 10% deflection)
ASTM D 1621
40
Water Absorption, Max.
(% by volume)
ASTM C 272
0.1
Density, Min.
(lb/ft³)
ASTM C 303
1.8
Water Vapor Permeance, Max.²
(perm)
ASTM E 96
(Dessicant Method)
< 1.0
Service Temperature, Max (°F)   165
Thermal
Thermal Resistance, R-value1

(°F.ft².hr / Btu per in thick)

ASTM C 518
(@75°F Mean Temperature)
5.0
Thermal Conductivity, k-value
(Btu.in / hr.ft².ºF)
ASTM C 518
(@75°F Mean Temperature)
0.2
Fire & Smoke
Flame Spread³
Smoke Developed³
ASTM E 84 / UL723
15 (Class A)
140

1 Specimens are aged and tested in accordance with FTC Rule (16 CFR, Part 460) and ASTM C578.
² Also available with drainage channels.
³ These numerical flame spread and smoke developed ratings are not intended to reflect hazards presented by this material under actual fire conditions. All applicable building codes must be followed.

GreenGuard Type VI 40 PSI XPS Insulation Board Product Sheet

GreenGuard Type VI 40 PSI XPS Insulation Board Product Sheet

GreenGuard XPS  Insulation Board Installation Guide

GreenGuard XPS Insulation Board Installation Guide

GreenGuard XPS & Sheathing Install Guide WRB

GreenGuard Insulation Board & Insulative Sheathing Installation Guide for WRBs

GreenGuard Type VI XPS Insulation Board Submittal Sheet

GreenGuard Type VI 40 PSI XPS Insulation Board Submittal

Kingspan GreenGuard Technical Evaluation Report TER No. 1407-03

Technical Evaluation Report 1407-03 - XPS Insulation Board Attic and Crawl Space Applications

Kingspan GreenGuard Technical Evaluation Report TER No. 1407-04

Technical Evaluation Report 1407-04 - XPS Insulation Board Basement Applications

Kingspan GreenGuard Technical Evaluation Report TER No. 1407-05

Technical Evaluation Report 1407-05 NFPA 285 - XPS Insulation Board / Building Wraps

Kingspan GreenGuard Technical Evaluation Report TER No. 1011-01

Technical Evaluation Report 1011-01 - XPS Insulation Board Wind Pressure Performance

GreenGuard XPS Insulation Board Safety Data Sheet

GreenGuard XPS Insulation Board Safety Data Sheet

Fav Faved
GreenGuard IECC Reference Guide Technical Bulletin #15

GreenGuard IECC Reference Guide 2009 & 2012 Versions

GreenGuard Products Technical Bulletin #11

GreenGuard Products Adhesive, Sealant & Primer Compatibility

GG_TB007

GreenGuard XPS Insulation Board Contribution to LEED Credits

Kingspan GreenGuard Section 07 21 00 Building Insulation

Kingspan GreenGuard Section 07 21 00 Building Insulation

GreenGuard XPS Insulation Board_50 Year Limited Thermal Warranty_US_CA_IMG

GreenGuard XPS Insulation Board 50 Year Limited Thermal Warranty

Warranty Registration Form 1708 - Interactive_Page_1

Kingspan Warranty Registration Form

Arcat

BIM Objects / CAD Details

Click the link below to view our BIM Objects / CAD Details from ARCAT

Kingspan Insulation BIM Objects/CAD Details from ARCAT

Download Typical Wall Assemblies

Do you need assistance planning your project?

Our teams are dedicated to helping make the process as easy as possible and ensure you get the right materials for your needs.

Contact Us

Contact Us

Kingspan Insulation North America

Head Office & Sales Office – North America

Kingspan Insulation LLC

2100 Riveredge Parkway, Suite 175

Atlanta, Georgia

USA

30328

Call: 1 800 241 4402

We use cookies on our website www.kingspan.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

If you do not click "Accept and close" and continue to use this website, we will assume that you consent to our use of cookies.