KingZip_Collage_KZ_NA

KingZip

Download
KingZip Endlap Expanded KingZip Endlap Expanded

KingZip Insulated Standing Seam Roof Panels

KingZip insulated metal roof panels were designed with energy-efficiency, durability, and low maintenance in mind. As a single component roof system, KingZip greatly reduces on-site installation time compared to traditional multi-part roof systems. KingZip’s superior thermal and airtight design lowers buildings’ operational energy demands, and as a result, reduces its carbon footprint.

  • Vertical side seam and integral batten provide an attractive linear accept to any roofing application
  • Factory cutbacks at eaves and end laps available
  • Easily adaptable to accommodate safety and fall arrest systems
  • Available in thicknesses ranging from 2”- 6”, allowing for an R-value of up to 43
  • Available in Cool Roof® coatings, intended to reduce solar heat gain and improve energy efficiency
  • GREENGUARD Gold Certified
KingZip_Profile_Render_White_KZ_NA

Product Information

Technical Information
Performance Testing & Approvals
Warranty
Colors
Exterior profile 2” (nominal) mechanically seamed sidelap, ribbed with stucco embossing(optional non-embossed)
Interior profile Minor Rib or V-groove with stucco embossing (optional non-embossed)
Exterior gauge 26, optional 24 or 22 ga
Interior gauge 26, optional 24 or 22 ga
Widths 42"
Reveal options N/A
Lengths 8’ to 39’
Thicknesses 2”, 2.5”, 3”, 4”, 5”, 6”
Post fabrication Cutbacks at eaves and end laps
R-value ≈ 7.2 per inch per ASTM C518 @ 75˚F
≈ 8.25 per inch per ASTM C518 @ 35°F
Test Procedure Results
Fire FM-4880 Class 1 Fire Rating of Insulated Wall or Wall and Roof/Ceiling Panels,
Interior Finish Materials or Coatings, and Exterior Wall Systems
ASTM E84 Flame spread: 25 or Less, Smoke developed: 450 or Less
Toxicity Test State of New York, Article 15, Part 1120 of the New York State Uniform Fire Prevention Code Kingspan panels are in compliance
Wind Uplift Factory Mutual 4471 1-105 @ 5’0” spans with minimum 14 gauge roof purlins
1-60 @ 6’ spans with minimum 14 gauge roof purlins
UL 580 Class 90 uplift rating 5’0” spans with minimum 14 gauge purlins
UL 580 Class 90 uplift rating Panels attached to 20 gauge decking with 3’ o.c. fastening
Strength ASTM E72 Chamber Method Panel load / span and deflection tables are available
Thermal Transmission ASTM C518
Thermal Performance at 75°   Thermal Performance at 35°
Thickness K-Factor R-Value Thickness K-Factor R-Value
2 0.07 14.4 2 0.06 16
2.5 0.06 18.0 2.5 0.05 20
3 0.05 21.6 3 0.04 24
4 0.03 28.8 4 0.03 32
5 0.03 36.0 5 0.03 40
6 0.02 43.2 6 0.02 48
Air Infiltration ASTM E283 and ASTM E1680 0.003 CFM/ft2 of Panel Area at 6.24 psf
Water Penetration ASTM E331 and ASTM E1646 No Water Penetration at 20.0 psf
Fatigue Tests Subjected to 2 million alternate cycles of 20 PSF positive and negative wind loading No metal / foam delamination or metal fatigue
Humidity Test Sample subjected to 100% relative humidity at 140°F for 1000 hours No evidence of metal primer corrosion
Autoclave Test Sample placed in an autoclave device and pressurized to 2 PSI at 212 °F for 2½ hours No evidence of delamination
Skin Delamination   No skin delamination with direct pull off pressure up to 1188 psf


Kingspan insulated metal roof and wall panels have been used on every continent in the world under extreme climatic conditions and are manufactured from the highest quality materials, using state of the art production equipment to rigorous quality control standards, ensuring long-term reliability and service life.

  • 2 year standard material workmanship warranty
  • Up to 20 years standard finish warranty
Contact Kingspan for more information regarding our optional warranty programs.
 

Insulated_panel_systems_colors

Downloads

KingZip Brochure

Kingspan Blue Book

Insulated Panel Systems Product Selector

Color Chart

Be Inspired Global Case Study Book

KingZip Data Sheet

KingZip Weight Table

KingZip Span Table

KingZip MasterFormat CSI Specification (DOC)

KingZip MasterFormat CSI Specification (PDF)

KingZip CAD Details (DWG)

KingZip CAD Details (PDF)

KingZip Installation Guide

Featured Projects

For the complete building envelope solution, consider these complementary products.

Can we help or provide a sample?

We use cookies on our website www.kingspan.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

If you do not click "Accept and close" and continue to use this website, we will assume that you consent to our use of cookies.