Logistics_Moreno_Valley_CA_Internal_2

Bristol Acrylic

The Industry Standard Dome

Thermally Broken Aluminum Framed Skylight

Bristol_Aluminum_Skylight
The thermally broken frame extrusion is designed with an open cavity in the mid section of the frame that runs the entire length of the frame. This open cavity is filled (poured) with a high strength, long lasting, non-thermally conductive epoxy. After the epoxy cures the aluminum is milled away on the bottom of the frame just below the epoxy (debridged). When the process is finished there is a complete separation of the exterior aluminum frame exposed to temperatures on the outside of the building and the interior frame exposed to interior temperatures and humidity. 

Poured and debridged thermal breaks have been used in window and skylight frames for many years and continue to be the most effective design in minimizing exterior temperature transfer to the interior building space and in the elimination of condensation.
ALT-CM-2-Dimensions
Previous
Next

Product Information

Technical Information
Testing & Approvals
Warranty
Frame Material      Aluminum     
Dome Material Monolithic acrylic
Width Up to 60"
Length  Up to 120"
Visible Light Transmittance*  
Single Dome - Clear 95%
Single Dome - White 53%
Single Dome - Grey 27%
Single Dome - Bronze 27%
Double Dome - Clear/Clear 92%
Double Dome - White/Clear 49%
Double Dome - Grey/Clear 25%
Double Dome - Bronze/Clear 25%
Solar Heat Gain Coefficiency*  
Single Dome - Clear 0.79
Single Dome - White 0.68
Single Dome - Grey 0.50
Single Dome - Bronze 0.53
Double Dome - Clear/Clear 0.89
Double Dome - White/Clear 0.63
Double Dome - Grey/Clear 0.43
Double Dome - Bronze/Clear 0.44
U-Factor / R-Value*  
Single Dome - Clear 1.02 / 1.01
Single Dome - White 1.02 / 1.01
Single Dome - Grey 1.02 / 1.01
Single Dome - Bronze 1.02 / 1.01
Double Dome - Clear/Clear 0.56 / 1.79
Double Dome - White/Clear 0.56 / 1.79
Double Dome - Grey/Clear 0.56 / 1.79
Double Dome - Bronze/Clear 0.56 / 1.79
*Values may vary slightly depending on unit size and specifications.
Test Results
AAMA WDMA/CSA 101/I.S.2/A440-08 & WDMA/CSA 101/I.S.2/A440-05
IECC 2015 Meets without controls climate zone 1, meets with controls climate zones 2-8 (double glazed skylight)
NFPA CC2 Rated / Class A Plastic Performance
NFRC Certified (double glazed skylight)
OSHA Meets CFR fall regulations


Kingspan Light + Air daylighting products have been used on every continent in the world bar one under extreme climatic conditions and are manufactured from the highest quality materials, using state of the art production equipment to rigorous quality control standards, ensuring long-term reliability and service life.

  • 10 year standard material workmanship warranty*
​* Contact Kingspan for more information regarding our terms and conditions and optional warranty programs.

Downloads

Product Data Sheets
CAD Drawings
Literature

Bristol Unit Skylight PDS

AL/ALB/ALT Product Data Sheet

Bristol ALT CM 1 CAD Detail (DWG)

AutoCAD Drawing

Bristol ALT CM 1 CAD Detail (PDF)

AutoCAD Drawing (PDF)

Bristol ALT CM 2 CAD Detail (DWG)

AutoCAD Drawing

Bristol ALT CM 2 CAD Detail (PDF)

AutoCAD Drawing (PDF)

Who We Are Brochure

Tufflite_ECO_SVAPC_CM_Triarch_Smoke_Vent

Related Products

Looking for a different product or need to add something else to your project? Check out our related products below.

Smoke Vents
Gladiator Roof Safety Products

Do you need help with selecting the right product?

Get in touch with our friendly customer support team and they'll guide you through using Bristol Acrylic in your project.

Contact Customer Support

We use cookies on our website www.kingspan.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click “Accept and close” to accept the use of cookies on our website. If you do not click “Accept and close” but continue to use this website: you thereby consent to the use of all Kingspan's cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.

The Cookie Policy & Control and Website Privacy Notice were updated on 13 August 2018.