All Steel  Raised Access Floor System

All Steel 1000

All Steel 1000 System

All Steel Access Floor panels are epoxy coated unitized shells consisting of a flat steel top sheet welded to a formed steel bottom sheet. Manufactured to exacting tolerances, these non-combustible rigid, solid panels deliver the ultimate in strength and durability with the convenience of lightweight construction.

All Steel Bare Panel

System Characteristics

  • Panel weight : 4.25 lbs/ft² bare.
  • All steel welded construction.
  • Protected from corrosion by a powder paint finish.
  • Class A flame spread rating.
  • Non-combustible material.

System Performance Criteria

Tate Standards to CISCA Testing Methods

System Performance Criteria (Tested on Actual Understructure*)

System Type Static Loads Rolling Loads Impact Loads
Panel Understructure Design Loads1 Minimum
Ultimate Loads
Safety Factor
(min 2.0)2
10 Passes 10,000 Passes
All Steel 1000 Bolted Stringer 1000 lbs 2000 lbs PASS 400 lbs 400 lbs 150 lbs

*All tests are performed using CISCA's Recommended Test Procedures for Access Floors with the exception of Design Load

1. System Design Load is based on permanent set ≤ 0.010” and is verified by loading panels in accordance with the CISCA concentrated load method but with panels installed on actual understructure instead of steel blocks. (Testing on blocks does not represent performance of an actual installation.) Ultimate, Rolling, and Impact Load tests are performed using CISCA Test Procedures.
2. Safety Factor is Ultimate Load divided by Design Load. 

Product Resources & Downloads

All Steel 1000 Datasheet 24in

All Steel Detail (PDF) 24in

All Steel Detail (CAD) 24in

All Steel 1000 Specification 24in

All Steel 1000 Datasheet 60cm

All Steel Detail (PDF) 60cm

All Steel Detail (CAD) 60cm

All Steel 1000 Specification 60cm

Tate All Steel Panel (60cm module) BIM

Tate All Steel Bolted Stringer System (60cm module) BIM

Tate Pedestal for Bolted Stringer System (60cm module) BIM

Tate Stringer for ConCore and All Steel (60cm module) BIM

ConCore & All Steel Owner's Manual

Other All Steel Options

Other Data Center Solutions

More About Tate

Need to talk? We're here for you.

Our team is ready to help you select the best solutions for your project.

Contact our support team

We use cookies on our website To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click “Accept and close” to accept the use of cookies on our website. If you do not click “Accept and close” but continue to use this website: you thereby consent to the use of all Kingspan's cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.

The Cookie Policy & Control and Website Privacy Notice were updated on 13 August 2018.