Granite

Granite

A member of Tate's STONEWORKS™ line of integrated finishes.

A Timeless Look From a Modern Finish

Attractive, durable, and versatile, STONEWORKS™ Granite panels bring a sense of elegant beauty to any project. The Granite panel combines aesthetic and structural components into one complete integrated product, and is available in multiple colors with a honed surface texture. The edge of the panel is factory laminated with a color matched plastic banding which creates a faux grout line and provides protection during removal. As the panel is made from natural products, slight shade and color tone differences will occur and is the reason this product is assigned a V1 Variation Rating.

Granite Panel Granite Panel
Previous
Next

Key Performance Characteristics

  • Smooth surface for easy maintenance
  • Supported by a heavy-duty bolted stringer system
  • Non-combustible
  • Color-matched edge banding protects the edge during removal
  • Must be sealed in the field after installation with a color enhancing sealer
  • Available with a honed surface texture and in multiple colors (Fog, Black Pearl, Arctic Storm)

Granite Stoneworks Panels

The STONEWORKS Granite panel is an integrated slab which incorporates an aggregate mix to provide structural stability for everyday use, and the surface is machined to expose the aggregate. The panel is laminated with an E-Coated steel reinforcing bottom sheet, and is available in 2’x2’ module sizes and installed in a heavy-duty bolted stringer system without the use of corner lock screws.

Natural Variation

Granite Variation

Granite from Tate's STONEWORKS line is a natural stone product, and all natural stone products contain some degree of variation, which enhances the natural look of the finish. This variation comes from differences in color or aggregate distribution.
 
Our finishes line contains several products that fall into one of 3 categories:

  • V1 is slight variation
  • V2 is moderate variation
  • V3 is substantial variation 

Granite is V1.

Explore Other STONEWORKS™ Finishes

Additional Finish Options

Product Resources & Downloads

Granite Panel Datasheet 24in

Granite Panel Detail (PDF)

Granite Panel Detail (CAD)

Granite Panel Specification (7"-36" FFH) 24in

Granite Panel Specification (5"-6" FFH) 24in

Granite Panel Specification (4" FFH) 24in

STONEWORKS™ Panel Installation Manual

STONEWORKS™ Panel Owner's Manual

 

STONEWORKS panels are not sealed in the factory however we do recommend that a sealer be field applied to help ensure the long-term performance of the product. There are many sealers on the market and they play an important role in the outcome of the floor. The cost of sealers varies widely, and depending on the chemical makeup of the sealer it will likely affect the Stoneworks panel’s color, gloss, slip and stain resistance, and overall wearability as well as influence the various maintenance schedules and protocols. Whether the product is used in high traffic walkways & corridors or breakrooms & food/drink prep areas will affect the sealer choice. Therefore, it is important that sealers are evaluated against the application’s specific requirements and specified by the architect in the project specifications.

STONEWORKS panels are cement-based products and are compatible with sealers formulated for concrete or natural stones. The only precaution when evaluating sealers is that much of the information pertains to concrete sealers applied on slabs and not raised floor panels. As a general rule, you may want to stay away from viscous sealers as they tend to fill in the seams of the panels and adversely affect the accessibility of the system. In addition, stick with sealers that have a neutral pH and can be applied by spray misting vs. flooding the floor as both strong chemicals and excess flooding can have a negative impact on the floor.

To assist the architect in their evaluation, we have provided a link to a sealer review site as well as a chart detailing the sealers that have been selected and used by customers on past projects or have been evaluated by Tate. While Tate recommends that a sealer be used on STONEWORKS panels, Tate does not recommend any specific sealer. For any sealer selected, a suitably sized mock-up of STONEWORKS panels should be constructed with the specified sealer applied and reviewed by all parties to ensure desired results prior to application on the installed floor system

Concrete Review Link:    www.concretesealerreviews.com
 

Download Sealer Chart for More Info:

Sealer Chart

Finishes Brochure

Signature Style Finishes Brochure

Discover your Signature Style

Tate Product Guide

Tate's Product Solutions Guide

Learn more about our Floor-to-Ceiling Solutions

Want to Order a Sample?

Granite samples are just an email away. To request a sample, send an email to Samples@TateInc.com.

Explore More of Tate

Need to talk? We're here for you.

Our team is ready to help you select the best solutions for your project.

Contact our support team

We use cookies on our website www.kingspan.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click “Accept and close” to accept the use of cookies on our website. If you do not click “Accept and close” but continue to use this website: you thereby consent to the use of all Kingspan's cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.

The Cookie Policy & Control and Website Privacy Notice were updated on 13 August 2018.