Classic Concrete Stoneworks

Classic Concrete

A member of Tate's STONEWORKS™ line of integrated finishes.

The Beauty of Simplicity

The STONEWORKS™ Classic Concrete access floor panel offers the ultimate combination of aesthetics and functionality that combines robust structural performance into one complete integrated product. Classic Concrete is available with a brushed surface texture or an exposed aggregate honed finish. The edge of the brushed panel is factory laminated with a color matched plastic banding. The exposed aggregate finish is available with edge banding or an eased edge that can be installed without stringers. As the panel is made from natural products, moderate shade and color tone differences will occur and is the reason this product is assigned a V2 Variation Rating.

Classic Concrete Panel Classic Concrete Panel
Previous
Next

Key Performance Characteristics

  • Supported by a heavy-duty or box beam bolted stringer system
  • Eased edge design can be free standing (no stringers)
  • Non-combustible
  • Color-matched edge banding protects the edge during removal
  • Sealed in the field after installation
  • Available in gray with a brushed surface texture or an exposed aggregate honed finish
  • Exposed aggregate honed finish also available with eased edge 

Classic Concrete Panels

The STONEWORKS Classic Concrete panel is a concrete slab with an E-Coated steel reinforcing bottom sheet and features a brushed or honed surface texture. The cement and aggregate provide the panel with structural stability for everyday use. The panel is available in 2’x2’ module sizes and is installed in a heavy-duty bolted stringer system without the use of corner lock screws.

Natural Variation

Classic Concrete Variation

Classic Concrete from Tate's STONEWORKS line is a natural stone product, and all natural stone products contain some degree of variation, which enhances the natural look of the finish. This variation comes from differences in color or aggregate distribution.
 
Our finishes line contains several products that fall into one of 3 categories:

  • V1 is slight variation
  • V2 is moderate variation
  • V3 is substantial variation 


Classic Concrete is V2.

Explore Other STONEWORKS™ Finishes

Additional Finish Options

Product Resources & Downloads

Classic Concrete Panel with Edge Band Datasheet 24in

Classic Concrete Panel with Edge Band Detail 24in (PDF)

Classic Concrete Panel with Edge Band Detail 24in (DWG)

Classic Concrete HD Stringer Spec (4in FFH) 24in

Classic Concrete HD Stringer Spec (5-6in FFH) 24in

Classic Concrete HD Stringer Spec (7-36in FFH) 24in

Classic Concrete with Edge Band Box Beam Stringer Spec (7 -36in FFH) 24in

Classic Concrete Panel with Eased Edge Datasheet 24in

Classic Concrete Panel with Eased Edge Detail 24in (PDF)

Classic Concrete Panel with Eased Edge Detail 24in (DWG)

Classic Concrete with Eased Edge Box Beam Spec (7 -36in FFH) 24in

Classic Concrete with Eased Edge HD Stringer Spec (4in FFH) 24in

Classic Concrete with Eased Edge HD Stringer Spec (5 - 6in FFH) 24in

Classic Concrete with Eased Edge HD Stringer Spec (7-36in FFH) 24in

Classic Concrete with Eased Edge Freestanding Spec (4in FFH) 24in

Classic Concrete with Eased Edge Freestanding Spec (5 - 24in FFH) 24in

STONEWORKS™ Panel Installation Manual

STONEWORKS™ Panel Owner's Manual

 

STONEWORKS panels are not sealed in the factory however we do recommend that a sealer be field applied to help ensure the long-term performance of the product. There are many sealers on the market and they play an important role in the outcome of the floor. The cost of sealers varies widely, and depending on the chemical makeup of the sealer it will likely affect the STONEWORKS panel’s color, gloss, slip and stain resistance, and overall wearability as well as influence the various maintenance schedules and protocols. Whether the product is used in high traffic walkways & corridors or breakrooms & food/drink prep areas will affect the sealer choice. Therefore, it is important that sealers are evaluated against the application’s specific requirements and specified by the design team in the project specifications.
 
STONEWORKS panels are cement-based products and are compatible with sealers formulated for concrete or natural stones. The only precaution when evaluating sealers is that much of the information pertains to concrete sealers applied on slabs and not raised floor panels. Viscous sealers tend to fill in the seams of the panels and adversely affect the accessibility of the system. Also, sealers that have a neutral pH and can be applied by spray misting vs. flooding the floor should be considered as both strong chemicals and excess flooding can have a negative impact on the floor.
 
To assist the design team in their selection of a sealer, we have provided a link to a sealer review site as well as a chart detailing the sealers that have been evaluated by Tate. Because it can be difficult to choose a proper sealer, Tate does suggest specific sealers to be considered in certain areas as detailed in the sealer evaluation chart. While Tate does propose these sealers, it is ultimately up to the design team to determine if the performance of these sealers is sufficient for the application.
 
For any sealer selected, a suitably sized mock-up of STONEWORKS panels should be constructed with the specified sealer applied and reviewed by all parties to ensure desired results prior to application on the installed floor system

 
Concrete Review Link:    www.concretesealerreviews.com
 

Download Sealer Chart for More Info:

Sealer Chart

Finishes Brochure icon

Signature Style Finishes Brochure

Discover your Signature Style

Tate Product Guide

Tate's Product Solutions Guide

Learn more about our Floor-to-Ceiling Solutions

Want to Order a Sample?

Classic Concrete samples are just an email away. To request a sample, send an email to Samples@TateInc.com.

Explore More of Tate

Need to talk? We're here for you.

Our team is ready to help you select the best solutions for your project.

Contact our support team

We use cookies on our website www.kingspan.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click “Accept and close” to accept the use of cookies on our website. If you do not click “Accept and close” but continue to use this website: you thereby consent to the use of all Kingspan's cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.

The Cookie Policy & Control and Website Privacy Notice were updated on 13 August 2018.