STONEWORKS

STONEWORKS
Access Floor Panels

Tate's STONEWORKS™ Panel

Tate's STONEWORKS panels eliminate the need for finish lamination as the high-end architectural finish and the structural integrity of the panel is combined into a single integrated panel. STONEWORKS panels are engineered to meet Tate Standards per CISCA testing methods.

Stoneworks Panel Edge Banded on HD Stringer Stoneworks Panel Edge Banded on HD Stringer
Previous
Next

System Characteristics

  • Meets Tate Standards per CISCA testing methods
  • Two performance options available: Design loads of 1250 lbs or 2500 lbs
  • Three understructure options available
  • Non-combustible
  • E-coated steel bottom sheet
  • All finish options are available with a beveled side and edge banding
  • Honed and Polished panels are avaiable with Eased Edge profile

System Performance

Tate Standards to CISCA Testing Methods

System Performance Criteria (Tested on Actual Understructure*)

System Type System Weight (lbs/ft2) Static Loads Rolling Loads Impact Loads
Panel Understructure Design Loads1 Minimum
Ultimate Loads
Safety Factor2 10 Passes 10,000 Passes

STONEWORKS™ Panel
(Eased Edge Only)

Free Standing 14.75 lbs/ft2 1250 lbs 1800 lbs 1.44 1000 lbs 800 lbs 100 lbs
STONEWORKS™ Panel
(Eased Edge & Edge Banded)
Heavy-Duty Bolted Stringer 15.5 lbs/ft2 1250 lbs 1800 lbs 1.44 1000 lbs 800 lbs 100 lbs
 
STONEWORKS™ Panel
(Eased Edge & Edge Banded)
Box Beam Stringer 16.5 lbs/ft2 2500 lbs 3750 lbs 1.5 2000 lbs 2000 lbs 200 lbs
 

*All tests are performed using CISCA's Recommended Test Procedures for Access Floors with the exception of Design Load

1. System Design Load is based on permanent set ≤ 0.010” and is verified by loading panels in accordance with the CISCA concentrated load method but with panels installed on actual understructure instead of steel blocks. (Testing on blocks does not represent performance of an actual installation.) Ultimate, Rolling, and Impact Load tests are performed using CISCA Test Procedures.
2. Safety Factor is Ultimate Load divided by Design Load. 

Product Resources & Downloads

The STONEWORKS panel is available with the following finish options. For more information or technical documentation, please click on your choice of finish.

STONEWORKS Panels are available on the following understructure systems. The Freestanding option is only available with the eased edge panel.

Finishes Brochure icon

Tate Finishes Brochure

Discover your Signature Style

Tate Product Guide

Tate's Product Guide

Learn more about our Floor-to-Ceiling Solutions

Other Access Floor Systems

More About Tate

Need to talk? We're here for you.

Our team is ready to help you select the best solutions for your project.

Contact our support team

We use cookies on our website www.kingspan.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click “Accept and close” to accept the use of cookies on our website. If you do not click “Accept and close” but continue to use this website: you thereby consent to the use of all Kingspan's cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.

The Cookie Policy & Control and Website Privacy Notice were updated on 13 August 2018.