ConCore 1250 Raised Access Floors

ConCore® 1250

The ConCore® 1250

Tate's ConCore® 1250 raised access floor panel is intended for commercial applications with a light total load requirement and is engineered to meet Tate Standards per CISCA testing methods.

ConCore-Full-Panel_Bare
Previous
Next

Key Performance Characteristics

  • Panel weight : 8 lbs/ft² bare.
  • All steel welded construction filled internally with a cementitious core material.
  • Protected from corrosion by an epoxy paint finish.
  • Class A flame spread rating.
  • Non-combustible material.

System Performance

Tate Standards to CISCA Testing Methods

System Performance Criteria (Tested on Actual Understructure*)

System Type System Weight (lbs/ft2) Static Loads Rolling Loads Impact Loads
Panel Understructure Design Loads1 Minimum
Ultimate Loads
Safety Factor
(min 2.0)2
10 Passes 10,000 Passes
ConCore® 1250 Posilock 8.5 lbs/ft2 1250 lbs 2500 lbs PASS 1125 lbs 875 lbs 150 lbs
Bolted Stringer 10.0 lbs/ft2 1250 lbs 2500 lbs PASS 1000 lbs 800 lbs 150 lbs

*All tests are performed using CISCA's Recommended Test Procedures for Access Floors with the exception of Design Load

1. System Design Load is based on permanent set ≤ 0.010” and is verified by loading panels in accordance with the CISCA concentrated load method but with panels installed on actual understructure instead of steel blocks. (Testing on blocks does not represent performance of an actual installation.) Ultimate, Rolling, and Impact Load tests are performed using CISCA Test Procedures.
2. Safety Factor is Ultimate Load divided by Design Load. 

Product Resources & Downloads

ConCore 1250 Datasheet 24in

ConCore Detail (PDF) 24in

ConCore Detail (CAD) 24in

ConCore 1250 Bolted Stringer Specification 24in

ConCore 1250 Posilock Specification 24in

ConCore 1250 Posilock Low Finished Floor Height (LFFH) Specification 24in

ConCore 1250 Posilock Low Finished Floor Height (LFFH) Freestanding Specification 24in

Tate ConCore Panel (24in module) BIM

Tate ConCore Bolted Stringer System (24in module) BIM

Tate Stringer for ConCore and All-steel (24in module) BIM

Tate Pedestal for Bolted Stringer System (24in module) BIM

Tate Perimeter Pedestals for Bolted Stringer System (24in module) BIM

Tate Seismic Pedestal for Bolted Stringer System (24in module) BIM

Tate Seismic Perimeter Pedestal for Bolted Stringer System (24in module) BIM

Tate Bolted Stringer System with Perimeter Pedestal (24in module) BIM

Tate ConCore Panel (24in module) BIM

Tate PosiLock-Cornerlock System (24in module) BIM

Tate Pedestal for PosiLock-Cornerlock System (24in module) BIM

Tate Pedestal for Low Finished Floor Height (LFFH) PosiLock-Cornerlock System (24in module) BIM

Tate Perimeter Pedestal for PosiLock-Cornerlock System (24in module) BIM

Tate Ramp Assembly (ConCore Panels-Imperial) BIM

Tate Stair Assembly (ConCore Panels-Imperial) BIM

Tate Fascia Assembly (Imperial) BIM

ConCore 1250 Datasheet 60cm

ConCore Detail (PDF) 60cm

ConCore Detail (CAD) 60cm

ConCore 1250 Bolted Stringer Specification 60cm

ConCore 1250 Posilock Specification 60cm

ConCore 1250 Posilock Low Finished Floor Height (LFFH) Specification 60cm

ConCore 1250 Posilock Low Finished Floor Height (LFFH) Freestanding Specification 60cm

Tate ConCore Panel (60cm module) BIM

Tate ConCore Bolted Stringer System (60cm Module) BIM

Tate Stringer for ConCore and All-steel (60cm module) BIM

Tate Pedestal for Bolted Stringer System (60cm module) BIM

Tate ConCore Panel (60cm module) BIM

Tate ConCore Panel with PosiTile Carpet Tile (60cm module) BIM

Tate Pedestal for Posilock-Cornerlock System (60cm module) BIM

Tate Pedestal for Low Finished Floor Height (LFFH) Posilock-Cornerlock System (60cm module)BIM

Tate Perimeter Pedestal for PosiLock-Cornerlock System (60cm module) BIM

Tate Ramp Assembly (ConCore Panels-Metric) BIM

Tate Stair Assembly (ConCore Panels-Metric) BIM

Tate Fascia Assembly (Metric) BIM

ConCore & All Steel Owner's Manual

The ConCore® 1250 is available with these finish options

ConCore 1250 Panels are available on the following understructure systems in both standard and low finished floor height (LFFH) options.

Other ConCore Options

Raised Access Floor Systems

More About Tate

Need to talk? We're here for you.

Our team is ready to help you select the best solutions for your project.

Contact our support team

We use cookies on our website www.kingspan.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click “Accept and close” to accept the use of cookies on our website. If you do not click “Accept and close” but continue to use this website: you thereby consent to the use of all Kingspan's cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.

The Cookie Policy & Control and Website Privacy Notice were updated on 13 August 2018.