Glazer_Childrens_Museum_Tampa_FL_01_DW1000_DW2000S_US

Designwall 1000

Download
Designwall 1000 Vertical Joint Designwall 1000 Vertical Joint

BENCHMARK Designwall 1000 Architectural Wall Panels

Combining high-end architectural features with a value engineered price, Designwall 1000 meets both design and budgetary needs. Designwall 1000 is lightweight and easy to install, with a 1 1/8" thickness of standard expanded polystyrene (EPS) or optional polyisocyanurate (ISO) core. Custom finishes and substrates are available.

  • Trimless ends, longitudinal and transverse bends and folded corners add a unique architectural dynamic.
  • Available in Granitstone or Granitstone Quartz applied finish.
  • Widths ranging from 8” to 30” can integrate to combine distinctive designs
  • Can be horizontally or vertically applied
  • Reveal options include standard 1/2” or tight 1/16”
BENCHMARK_Designwall_1000_Profile_Render_DW1000_NA
Note:  Use of Designwall 1000 panels in multistory applications may require additional building code approval. Please contact Kingspan technical services at technical.NA@kingspanpanels.com or your local Kingspan sales representative for details.

Product Information

Technical Information
Performance Testing & Approvals
Warranty
Colors
Exterior profile Flat with stucco embossing (optional non-embossed, shadowline or Granitstone)
Interior profile Flat with stucco embossing (optional non-embossed)
Exterior gauge 22, optional 20ga
Interior gauge 24
Widths 8” - 30”
Lengths 4” - 24’ (18’ for non-embossed)
Thicknesses 1 ⅛”
Reveal options 1/16” to ½”
Post Fabrication Longitudinal bend, transverse bend, curve, trimless end, beveled edge, tapered edge, full end wrap, modified edge
R-value ≈ 30” module with EPS Core: 3.1
≈ 24” module with EPS Core: 2.8
≈ Polyisocyanurate Core: 4
Orientation Horizontal or Vertical

EPS Core

Test Procedure Results
Flammability ASTM E84 Flame spread <15, smoke developed <125
NFPA 259 Tested for potential heat of building materials 17,293 BTU/lb
NFPA 259 Self-Ignition: 752˚F, minimum
Flash Ignition: 698˚F, minimum
Foam specification ASTM C578 Type I, CFC and HCFC free
Structural ASTM E72 Vacuum chamber tested. Panel load / span and deflection tables are available
Thermal Transmission Thermal Modeling Therm 5.2 30” module with standard EPS Core: R-3.1
24” module with standard EPS Core: R-2.8
Air Infiltration ASTM E283 0.05 CFM/ft2 of panel area at 20 psf
Water Penetration ASTM E331 No uncontrolled water penetration at 20 psf. differential pressure. No water penetration at 6.24 psf pressure differential for a two (2) hour duration
AAMA 501.1 Dynamic water pressure testing – no sign of water leakage at 12 psf
Bond Strength Autoclave Sample placed in an autoclave device and pressurized to 2 PSI at 218˚F for 21/2 hrs
Humid aging No metal primer interface corrosion and/or delamination shall occur after 1000 hours at 135˚F and 100 percent relative humidity

ISO Core

Test Procedure Results
Flammability ASTM E84 Flame spread - 25, smoke developed <195 (core only)
NFPA 259 Tested for potential heat of building materials 11,281 BTU/lb
NFPA 259 Self-Ignition: 950˚F, minimum
Flash Ignition: 950˚F, minimum
Foam specification ASTM C591 Type I, CFC and HCFC free
Structural ASTM E72 Vacuum chamber tested. Panel load / span and deflection tables are available
Thermal Transmission Thermal Modeling Therm 5.2 With laminated Polyisocyanurate Core: R-4
Air Infiltration ASTM E283 0.05 CFM/ft2 of panel area at 20 psf
Water Penetration ASTM E331 No uncontrolled water penetration at 20 psf. differential pressure. No water penetration at 6.24 psf pressure differential for a two (2) hour duration
AAMA 501.1 Dynamic water pressure testing – no sign of water leakage at 12 psf
Bond Strength Autoclave Sample placed in an autoclave device and pressurized to 2 PSI at 218˚F for 21/2 hrs
Humid aging No metal primer interface corrosion and/or delamination shall occur after 1000 hours at 135˚F and 100 percent relative humidity


In today’s challenging construction market, realizing the customer’s requirements often involve leaving the past behind and stretching the boundaries forward. Kingspan products and services are engineered to provide the confidence necessary to meet these challenges.  
 
BENCHMARK By Kingspan insulated metal wall panels have been used on every continent in the world under extreme climatic conditions and are manufactured from the highest quality materials, using state of the art production equipment to rigorous quality control standards, ensuring long-term reliability and service life.
 

  • 2 year standard material workmanship warranty
  • Up to 20 years standard finish warranty
 
Contact our sales or customer service departments for information regarding our optional warranty programs.
 

BENCHMARK_colors

Downloads

BENCHMARK Black Book

BENCHMARK Product Selector

Color Chart

BENCHMARK Specialty Finishes & Precious Metals Brochure

Be Inspired Global Case Study Book

BENCHMARK Designwall 1000 EPS Data Sheet

BENCHMARK Designwall 1000 PIR Data Sheet

BENCHMARK Designwall Weight Table

BENCHMARK Designwall Wind Loads and Span Tables

Designwall 1000 Horizontal CAD Details (DWG)

Designwall 1000 Horizontal CAD Details (PDF)

Designwall 1000 Vertical CAD Details (DWG)

Designwall 1000 Vertical CAD Details (PDF)

Featured Projects

More from BENCHMARK

Support & Training

Can we help or provide a sample?

We use cookies on our website www.kingspan.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

If you do not click "Accept and close" and continue to use this website, we will assume that you consent to our use of cookies.