Specialty Wall Applications


One Trusted System - Infinite Possibilities

The scalability enabled by the unique two-panel system design offers extreme versatility, so that performance can be customized to fit the needs of any project. These specialized performance systems are manufactured in panelized sections, 4’ or 6’ wide, and are installed with a vertical mullion between each section.

Our specialty UniQuad® translucent wall systems offer all of the same benefits as a standard 4” UniQuad wall system, including:

  • Removable Skin Technology (RST) for unmatched system longevity
  • Durable Pentaglas® glazing with UV-inhibitor and superior color stability
  • Variety of glazing color options and system configurations

Dynamic Shading

Our standard UniQuad® system can be fitted with an internal louver system to create IntelaSun® - a dynamic shading system designed to effectively manage daylight levels, and reduce solar heat gain and glare. The system’s ability to dynamically adapt to provide optimal daylighting conditions can significantly improve a building’s energy efficiency, resulting in predictable energy consumption and associated cost savings.

Design larger aperture sizes to maximize daylight without worrying about over-lighting the space below. The skylight can be zoned, and the innovative internal louver system can adjust to scale down the size of the system during peak daylight hours.


High-Velocity Hurricane Zone (HVHZ)

We offer systems that have been independently tested and certified per HVHZ code requirements and have Florida Product Approval. These systems are extremely durable and are engineered to meet large missile impact resistance, cyclic static air pressure requirements, and uniform air pressure requirements per ASTM E1886/E1996 as well as ASTM E330/E331, FBC TAS 201, TAS 202, and TAS 203 for hurricane endurance.

Additional Insulation

While the standard UniQuad® system provides a certified U-factor of 0.26 per NFRC 100, additional insulation material can be incorporated into the cavity of the two-panel system in order to increase its thermal performance properties. Depending on the performance requirements, we can provide a U-factor ranging from 0.26 to 0.09.

It is important to note that there is always a trade-off between thermal insulation performance and light transmission. They have an inverse relationship, so the more material added to improve the thermal performance, the less light that the system can transmit. Thus, careful consideration should be made so as to optimize the overall performance of the system.


Sound Reduction

The sound-insulating panels include modifications to the interior cavity, consisting of specialized insert with enhanced sound reduction qualities. These inserts are light transmitting, enabling the system to maintain the highest possible ratio of light transmission to sound reduction performance (STC rating).

While our standard UniQuad® wall system has an STC of 26, by adding various inserts we are able to boost the systems performance to achieve:

  • ​Sound Transmission - STC ratings from 32 to 43
  • Outdoor-Indoor Transmission - OITC ratings from 32 to 29

Independently tested and certified in accordance with:
ASTM E90-09, ASTM E413, ASTM E1332-10a, ASTM E2235-04 (2012)


Forced Entry Resistant Systems

On the exterior, the UniQuad® Forced Entry skylight systems provides the same aesthetic as a typical UniQuad® translucent wall. However, modifications to the interior cavity, which include additional material inserts, result in a product with performance capabilities that satisfy the following requirements:

  • 5 minute forced entry resistance
  • US Department of State SD-STD-01.01 Revision G: Forced Entry and Ballistic Resistance of Structural Systems

  • Certified per Department of Defense (DoD) Security Engineering Manual UFC4-020-01