TarecTMpur Board on grey new

High performance industrial insulation

The Tarecpur range of CFC/HCFC-free rigid polyurethane (PUR) insulation is suitable for many types of use including:

• Insulated panels and composites
• Temperature and hygiene controlled environments
• Bodywork and refrigerated vehicles

Tarecpur Quick Guide

Product Information

Tarecpur is one of the most thermally efficient insulation materials available. It retains its thermal performance under the most severe operating conditions by virtue of its closed cell structure and high resistance to moisture absorption. Tarecpur has a thermal conductivity value of 0.024 W/m·K. A low thermal conductivity allows specified thermal performance standards to be achieved with a minimal thickness of insulation. This is particularly significant where space saving is important. A thinner insulant can facilitate installation in confined spaces. Furthermore, it can often result in a lower surface area and therefore savings in finishing materials.
Tarecpur is a thermoset material and unlike thermoplastic materials, it does not melt or produce flaming droplets when exposed to fire. It is rarely used without some form of additional facing. The type of application and facing material used should be considered in assessments of fire performance. For applications where fire performance is a particular issue, the use of products from the Tarecpir range of rigid polyisocyanurate insulation or the Kooltherm FM range of rigid phenolic insulation should be considered.
Tarecpur may be used for pipework and equipment operating within the temperature range –180ºC to +100ºC / –292ºF to +212ºF. For higher operating temperatures up to +200°C / +392°F the use of products from the Tarecpir range of rigid polyisocyanurate insulation should be considered.
Tarecpur has a 95% (or greater) closed cell content, which makes it non–wicking and highly resistant to moisture penetration. This is particularly valuable in humid conditions where the build up of moisture can compromise the performance of lesser insulation materials. When used in conjunction with a vapour tight facing, Tarecpur provides a system which is totally moisture resistant.
Tarecpur has an excellent resistance to a wide range of oils, solvents and chemicals. Its compatibility with most solvent based coatings and adhesives, and polyester and epoxy resin based coatings, and GRP resin systems, allows it to maintain its physical integrity when in contact with such substances. Tarecpur is particularly suited for applications where it comes into contact with liquid polyesters.
Weights on foam
Tarecpur is a lightweight insulation material with a high strength to density ratio, good dimensional stability and excellent mechanical characteristics. Due to the combination of its excellent thermal performance and remarkable mechanical strength, Tarecpur is an exceptional insulation material for general thermal insulation applications or the insulation of refrigerated vehicles. In particular, when utilised to insulate refrigerated vehicles, Tarecpur maintains its physical integrity when subjected to repeated shocks and vibrations over the life of the vehicle.
Please click on the links below to download the technical data relevant to each product. however, all of the tables below are featured in the Tarecpur Quick Guide available under Downloads.

Please contact our Techline department for the technical datasheet of the requested product application.

Techline Industry
+32 14 800 850

Tarecpur Quick Guide

Tarecpur Product Safety Information

Kingspan Insulation N.V.

Visbeekstraat 24

2300 Turnhout


+32 14 44 25 25