Insulated gutters, Kingspan fabrications, Kingspan original accessory

Insulated gutters

System overview

Download
Insulated gutter, Kingspan Fabrications, Kingspan Original Accessory
Previous
Next

Insulated drainage system


In the case of halls with shed roof, which are finished by the attic and in multi-storey halls, it is necessary to design a drainage system into the internal rainwater system. We therefore offer you a solution in the form of a system for internal drainage using the prefabricated inter-roof and attic insulated gutters.

We deliver drainage systems in an insulated and non-insulated version. The inner side is offered with a foil or galvanized metal. 

Insulated gutters

The gutters are supplied in individual parts to be installed on the site.
You can design the gutter between roofs with ramps on both sides or an atic gutter.

Insulated gutter are manufactured with IPN or with mineral fiber. We produce insulated gutter with the Skinplate (coated surface) or with RAL standard polyester or Spectrum.
  • Thickness of foam insulation IPN: 40, 60, 80, 100, 120 and 160 mm
  • Thickness of mineral wool insulation: 60, 80, 100, 120 and 150 mm
  • Maximum length of one gutter with IPN core is 6 m, in the case of a mineral wool core it is 4 m

For samples & services

Technical details

Insulated gutter between roofs, Kingspan fabrications, Kingspan original accessory
Insulated attic gutter, Kingspan fabrications, Kingspan original accessory
Insulated gutters, Kingspan fabrications, Kingspan original accessory

Standard dimensions [mm]:

A=530, B=164, C=300, D=insulation thickness, E=200, F=D x 1,3 + 80, α=roof slope, β=125°

Insulated gutters, Kingspan fabrications, Kingspan original accessory

Standard dimensions [mm]:

A=415, B=164, C=300, D=insulation thickness, E=200, F=D x 1,3 + 80, α=roof slope, β=125°

Insulated gutters, Kingspan fabrications, Kingspan original accessory

Standard dimensions [mm]:

A=415, B=164, C=300, D=insulation thickness, E=200, F=D x 1,3 + 80, α=roof slope, β=125°

Insulated gutters, Kingspan fabrications, Kingspan original accessory

Standard dimensions [mm]:

A, B=by request, C=300, D=insulation thickness, E=200, F=D x 1,3 + 80, α=roof slope, β=125°

Insulation core

Kingspan IPN foam with a thickness of 40, 60, 80, 100, 120 or 160 mm
Mineral wool with a thickness of 60, 80, 100, 120 or 150 mm


Surface sheets

Internal Sheet

Standard hot-dip zinc coated steel with a PES surface finish of 25 μm at 0,6 mm (or 0,5 mm) in RAL 9002. Other sheet thicknesses and surface finishes, consult the customer service of our company.

External Sheet

0,6 mm thick sheet with 25 μm PES or 50 μm Spectrum or 0,75 mm sheet with Skinplate 500 μm (PVC coated sheet).

It is recommended to install the prefabricated gutter on prepared steel hooks in a steel construction at a distance of up to 2,000 mm and to fit the steel structure appropriately to their size and location.

When designing an internal drain, keep in mind that the vertical rain pipe must not cross with the horizontal load-bearing elements of the roof structure (dies, stiffeners, etc.).

We recommend using overflowing faces for attic and inter-roof gutters, with precise drawing and dimensioning of its shape and size.

For the correct and safe operation we recommend heating in the winter months.

System Accessories & Services


Dedicated Technical Support is availalable throughout the building cycle, pre- and post manufacture.
Contact us for complimentary services including: U Value/ Condensation risk calculation, project specific NBS specifications, bespoke construction detail, advice on fire & accoustic performance, panel spans, fastener & roof drainage calculations, optimised lighting designs, building energy modelling & Installation Training.
 
Insulated gutters, Kingspan fabrications, Kingspan original accessory

Downloads

Kingspan Fabrications - Brochure

Kingspan Product Selector

Build a whole building envelope with our

If you are unsure what you need, get it touch.

We can help you with you project as well as recommend best fitting accessories for your solution.

Contact now

We use cookies on our website www.kingspan.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click "Accept and close" to accept the use of cookies on our website. If you do not click "Accept and close" but continue to use this website: you thereby consent to the use of all Kingspan's cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.