Insulated gutters

Download
InsGutter
Previous
Next

Product overview

In the case of halls with shed roof, which are finished by the attic and in multi-storey halls, it is necessary to design a drainage system into the internal rainwater system. We therefore offer you a solution in the form of a system for internal drainage using the prefabricated inter-roof and attic insulated gutters.

We deliver drainage systems in an insulated and non-insulated version. The inner side is offered with a foil or galvanized metal. 

  • Thickness of foam insulation IPN: 40, 60, 80, 100, 120 and 160 mm
  • Thickness of mineral wool insulation: 60, 80, 100, 120 and 150 mm
  • Maximum length of one gutter with IPN core is 6 m, in the case of a mineral wool core it is 4 m
The gutters are supplied in individual parts to be installed on the site.
You can design the gutter between roofs with ramps on both sides or an atic gutter.

Insulated gutter are manufactured with IPN or with mineral fiber. We produce insulated gutter with the Skinplate (coated surface) or with RAL standard polyester or Spectrum.

Downloads

Kingspan Accessories (EN)

Information about the Kingspan Accessories for Panels

Kingspan Total Roof Solution (EN)

Technical Information

Drawings - inter-roof, attic gutter
Dimensions and shapes
Material
Handling, storage, assembly
Planet Passionate
Gutter_between_roofs_CZ
Attic_gutter_CZ
Gutter_L01_IPN_CZ

Standard dimensions [mm]:

A=530, B=164, C=300, D=insulation thickness, E=200, F=D x 1,3 + 80, α=roof slope, β=125°

Gutter_L02_IPN_CZ

Standard dimensions [mm]:

A=415, B=164, C=300, D=insulation thickness, E=200, F=D x 1,3 + 80, α=roof slope, β=125°

Gutter_L03_IPN_CZ

Standard dimensions [mm]:

A=415, B=164, C=300, D=insulation thickness, E=200, F=D x 1,3 + 80, α=roof slope, β=125°

Gutter_L04_IPN_CZ

Standard dimensions [mm]:

A, B=by request, C=300, D=insulation thickness, E=200, F=D x 1,3 + 80, α=roof slope, β=125°

Insulation core

Kingspan IPN foam with a thickness of 40, 60, 80, 100, 120 or 160 mm
Mineral wool with a thickness of 60, 80, 100, 120 or 150 mm


Surface sheets

Internal Sheet

Standard hot-dip zinc coated steel with a PES surface finish of 25 μm at 0,6 mm (or 0,5 mm) in RAL 9002. Other sheet thicknesses and surface finishes, consult the customer service of our company.

External Sheet

0,6 mm thick sheet with 25 μm PES or 50 μm Spectrum or 0,75 mm sheet with Skinplate 500 μm (PVC coated sheet).
zatepleny_zlab_render_CZ
It is recommended to install the prefabricated gutter on prepared steel hooks in a steel construction at a distance of up to 2,000 mm and to fit the steel structure appropriately to their size and location.

When designing an internal drain, keep in mind that the vertical rain pipe must not cross with the horizontal load-bearing elements of the roof structure (dies, stiffeners, etc.).

We recommend using overflowing faces for attic and inter-roof gutters, with precise drawing and dimensioning of its shape and size.

For the correct and safe operation we recommend heating in the winter months.
Planet Passionate
Prin noul program de durabilitate al grupului nostru pe următorii 10 ani, numit Planet Passionate, ne propunem să facem progrese importante în ceea ce privește durabilitatea afacerii și produselor noastre.

System Accessories & Services

Kingspan_Insulated_Gutter_2D_Render_AU
Dedicated Technical Support is availalable throughout the building cycle, pre- and post manufacture.
Contact us for complimentary services including: U Value/ Condensation risk calculation, project specific NBS specifications, bespoke construction detail, advice on fire & accoustic performance, panel spans, fastener & roof drainage calculations, optimised lighting designs, building energy modelling & Installation Training.

Multe produse