With a wide range of finishes and complete colour freedom, individual cassettes on a panel can be finished in a different post-powder coating and in any BS or RAL colour of your choice and can vary in size.
Line and level steel work
Continue until complete!
Integrating multiple aluminium cassettes on a single insulated panel, with a wide range of finishes and complete colour freedom. Individual cassettes on a panel can be finished in a different post-powder coating and in any BS or RAL colour of your choice and can vary in size. Architectural powder coating to Qualicoat standard or Qualicoat ‘Seaside’ standard.
Panel: Sizes are from 600mm width x 1200mm length to 1200mm width x 6000mm length.
Cassette: Sizes from 307mm width x 307mm length to 1174mm width x 3800mm length. Various sizes and colours can be used on any one panel.
Both the horizontal and vertical joints between each cassette / panel are 24mm and formed using an EPDM push-in gasket.
Note: The weight of a BENCHMARK Kreate panel is determined by the cassette design arrangement. Please contact the BENCHMARK Technical Department for further information.
Kreate panels have a Thermal Transmittance (U-value), calculated using the method required by the Building Regulations Part L2 (England & Wales) and Building Standards Section 6 (Scotland), of:
Individual cassettes on a panel can be finished in a different post-powder coating and in any BS or RAL colour of your choice and can vary in size.
Architectural powder coating to Qualicoat standard or Qualicoat ‘Seaside’ standard.
External finishes and Colours Chart
Kreate panels are FIREsafe, and approved by the Loss Prevention Certification Board (LPCB) to LPS 1181 Grade EXT-B.
Kreate is ECOsafe with a polyisocyanurate (PIR) insulation core that contains no CFC’s or HCFC’s and has a low global warming potential.
Fire Test Certification and Real Fire Case Studies
Contact us for industry leading warranties. Protected by a global leader in building envelopes.
For each value individual and combined load cases with appropriate load factors and temperatures have been considered.