Plans tailored to you

Kingspan's Fuel Management Plans are tailored to suit your business, depending on the results of your Fuel Resilience Survey carried out by our Fuel Specialists. The survey includes; assessment of EN590 and ISO4406:1999 compliance, OFTEC tank inspections, environmental risk assessment and collection & testing of fuel samples. Should any tanks need to be replaced, our team can also decommission old tanks and install new ones. 

If you have not had an inspection recently it is likely that your tanks and tank management systems may not be compliant with current legislation. 
Call now to book your site assessment 0818 543 500 in ROI or 028 3836 4600 in NI.

Integrated fuel management solutions

Site assessment

What is EN590 and ISO 4406:1999?

EN590 is an EU standard that outlines the properties that all diesel fuels need to meet before they are sold in the EU. Since its inception EN590 has been adapted to lower the Sulphur content of diesel and now allows the blending of up to 7% of bio-diesel with conventional diesel. Whilst this has some environmental benefits, it could also have a long-term impact in the performance of your stored fuel. 

Bio-diesel is hydroscopic, meaning it naturally absorbs water. As a result, you should regularly test your fuel to ensure it does not exceed the 200mg of water per kg (0.02%) standard outlined by EN590. The standard states that if your fuel does contain more that 0.02% of water per kg that you should ensure this is removed using an extraction process such as fuel polishing. In addition to the hydroscopic properties that bio-diesel possesses, it also reduced the Sulphur content of the diesel you use. Whilst this is an excellent environmental benefit, reduced Sulphur is ideal for diesel bug growth, therefore further contaminating the fuel. This can also be monitored and maintained through the implementation of an Intergrated Fuel Management Solution. 

ISO 4406:1999 is commonly referred to as the cleanliness code and consists of a three number rating system referring to the contaminant levels of correlating particles, 18/16/13. The particles are measured when oil flows past a fine laser beam, which has been programmed to look for particles that are 4, 6 and 14 microns in size. The volume of these are then reported. 

How does this relate to the 18/16/13 principle?

18/16/13 refers to the range in which these particles must fall within in order to be considered 'clean'. The particle volumes are then cross-referenced with the ISO Standard Table to find out whether the oil can be considered clean, with lower numbers in the code indicating fewer particles in the oil;
  • 18 = between 1300 - 2500 particles larger than 4 microns
  • 16 = between 320 - 640 particles larger than 6 microns
  • 13 = between 40 - 80 particles greater than 14 microns
In order to ensure your oil meets these standards you will need to have it regularly tested and polished where necessary. 

Benefits of a fuel management plan

Fuel management benefits

Contact the team


Integrated fuel management solutions

Call us today on0818 543 500 in ROI or 028 3836 4600 in NI for support and advice on our integrated fuel management solutions.

Talk to the team

Contact Us

Our expert, local team is here with professional advice on your fuel management requirements.

Enquire now

We use cookies on our website To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click "Accept and close" to accept the use of cookies on our website. If you do not click "Accept and close" but continue to use this website: you thereby consent to the use of all Kingspan's cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.

The Cookie Policy & Control and Website Privacy Notice were updated on 13 August 2018.