Attiro magnetic backed engineered timber overlay

Innovation meets elegance, the beauty of Attiro is the simplicity with which you can create an engineered timber floor whilst retaining access to the underfloor void created. Attiro benefits from powerful magnetised strips that are bonded to the underside of the timber planks which in turn adhere to the steel encapsulated floor panels. With a genuine oak veneer available in a wide choice of finishes, you never have to compromise on style or function again.

Features of Attiro

  • 4mm European solid oak
  • 0.45mm protective edge band
  • 11.5mm Birch plywood
  • 1mm magnetic strip
  • Micro-bevel edge

Attiro datasheet

Access Floors Finishes Brochure

Product information

Dimensions and profile
Efficient installation
Eye catching layouts
Sustainability and accreditations
Quality, luxury, prestige
Standard width: 160, 180, or 200mm.
Various lengths available from: 1200mm – 2200mm.
All Attiro staves are 16.5mm in depth.
The Attiro oak staves are engineered as follows:
  1. 4mm European solid oak veneer
  2. Micro bevel
  3. Protective edge-banding
  4. Magnetic base
  5. Birch Plywood
Attiro can be installed at fit out stage, prior to testing and commissioning to reduce waste and lead times during construction. It works hand-in-hand with Kingspan’s steel encapsulated raised access floor panels.
With Attiro, you never have to compromise on style. Various layout options are available, including staggered joint layout, herringbone, border and diagonal running bond. A standard Attiro installation features random staggered joints using various lengths of Attiro. Bespoke column borders and skirtings can also be crafted.
We can assist you in gaining two key environmental and sustainability accreditations: LEED (Leadership in Energy and Environmental Design) and BREEAM (BRE Environmental Assessment Method). Attiro only uses FSC, European sourced Oak and Class E1 Plywood in accordance with the European Standard for wood-based panels, and ideally it can be reused and reinstated in other areas when the opportunity arises.
The hallmarks of Italian craftsmanship. We’ve taken these time-honoured traditions and fused them with groundbreaking British engineering to create something new and inspirational. Attiro is the result of impeccable attention to detail. Everything that goes into its creation is carefully hand-picked. From the prime grade European sustainable lumber we source to the master craftsmen who perfect it.
Questions about Attiro? We probably have the answers! Visit the Attiro FAQ section.

Case studies

Magnetically beautiful

Attiro combines all of the beauty of engineered oak with all of the ease of an access flooring system. Representing a radical departure from the alternative bonded systems, with a magnetised Attiro system you can create a traditional-style wooden floor without compromising access to the underfloor void.

Bespoke design assist

In conjunction with the Attiro solution, we offer an industry-leading bespoke Design Assist service. By engaging at the beginning of the project, we can help you to develop a lay-out plan to fully realise your vision. As part of the service, we mitigate cost variances by providing accuracy, predictability and efficiency throughout the installation.
Workman in high vis laying Attiro overlay wood onto access floor

Extensive choice of shades

Attiro is lacquered in a hard wax oil finish and comes in a range of shades and finishes to suit any taste and interior – from deep, rich grains to crisp, clean whites. Featuring a ‘brushed’ surface finish as standard, with alternative ‘sawmill’ and ‘rustic hand scraped’ finishes also available.

Product performance

Magnetic performance
Panel fire performance
System sound performance
Raised access floor interface
Expansion joints
Slip Resistance Dry: >60PTV Wet: >45PTV
Magnet Type Isotropic Flexible Ferrite
Wi-Fi Interference Tested and approved
Electrical Equipment Tested and approved - including
pacemaker and telephony devices
Reaction EN 13501:1 Dfl-s1
  With barrier
Airborne Insulation Horizontal (Dnfw) 49 dB 53 dB
Impact Insulation Horizontal (Lnfw) 61 dB 59 dB

Based on Attiro applied over low-profile TLM26 access floor system.

Thickness 16.5mm Nominal
Width 160mm/180mm/200mm
Lengths 1200 - 2200mm (random)*
Surface Finish Hard wax oil onto ‘brushed’ surface
Category Magnetic dry lay


*Sawmill and Rustic hand-scraped finishes also avaiable

Warranty only valid when installed by an approved fitter on a full Kingspan Access Floor system.

All genuine timber floor products (including Attiro) require a relative humidity level of 40% to 60% to be maintained throughout the building.

FSC Certificate 2017 to 2022

Tolerance: 0.75mm maximum height difference between adjacent raised floor panels.
Designed for use with Kingspan Access Floor systems.
8mm expansion joints every 15m width and every 35-45m in length. Colour matched 8mm factory-formed silicone material. 8-10mm expansion to be included for all perimeter adjustments.

Design Assist

As part of the Attiro package, we offer an industry-leading bespoke Design Assist service. By engaging at the beginning of the project to develop a lay-out plan to fully realise your vision, we mitigate cost variances by providing accuracy, predictability and efficiency throughout the installation.

Selected Attiro samples

Would you like a sample?

We also offer a wide range of alternative options.

Contact a member of the team for more information.

Kingspan Access Floors

Burma Drive



+44 (0) 1482 781701



Related products

Buying details

Kingspan Access Floors

For more information about our access flooring, please get in touch

Burma Drive



+44 (0) 1482 781701