Kingspan Incendia

Download
Kingspan Incendia Flap Ventilator
Previous
Next

Mono flap smoke and heat exhaust ventilator with large extraction capacity

The Kingspan Incendia Flap Ventilator is an EN 12101-2 certified mono flap system and is suitable for the extraction of smoke and heat, daily ventilation and for daylight ingress.

Its large dimensions, a geometric surface of up to 5.1 m2, makes the Incendia ideally suited to the effective extraction of significant quantities of (polluted) hot air and smoke.

In case of fire, the Incendia opens within 60 seconds to an opening angle of 140°, and the mono flap is fully locked in its final position, thus ensuring the maximum extraction of smoke and heat. For daily ventilation the opening angle can be timecontrolled if a motor control is opted for.

The Kingspan Incendia is available in different base types and uninsulated or insulated aluminium or transparent flap. Depending on the size, the ventilator is equipped with one or two pneumatic or electric control(s).

Product Datasheet

Kingspan Incendia Product Datasheet

Product Information

Features & Benefits
Dimensions & Weight
Performance
  • Choice of uninsulated base or 30 mm insulated base
  • The Incendia is produced using recycled aluminium which produces 60 to 80% less CO2 emissions than the production of primary aluminium
  • Significant flexibility in dimensions and flange type
  • Seal covered all round with PE tape, which prevents freezing in position and guarantees high air density
  • Base and flanges are sea water and corrosion resistant EN AW 5754 (AlMg3) aluminium sheet material
  • Easy installation
Kingspan Incendia Flap Ventilator
Available in a wide variety of sizes ranging from 800mm x 1000mm to 1700mm x 3000mm (Throat Size of Incendia; Width x Lenght)
  • EN 12101-2 approved: B300, WL1500
  • U-value system = 1.3 - 5.5 W/m2 K according to EN 10077-2 (depending on dimensions and version)
  • Air permeability in underpressure: EN 1026: 600 Pa, EN 12207: class 4
  • Watertightness: EN 1027: 600 Pa, EN 12208: class 9A
  • Resistance to varying wind loads: class C1, 200 Pa (= P2) deflection < 1/300 in accordance with EN 12210 / EN 12211
  • Fall-through safety: SB1200 according EN 1873:2014 *)

WL/SL is based on maximum dimension type 1730. If type < 1730 higher WL/SL possible

Related Products:

Additional Resources:

Kingspan Light + Air UK

Mellyn Mair Business Centre

Lamby Industrial Park

Wentloog Avenue, Cardiff

CF3 2EX

+44 29 2077 6160

We use cookies on our website www.kingspan.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click "Accept and close" to accept the use of cookies on our website. If you do not click "Accept and close" but continue to use this website: you thereby consent to the use of all Kingspan's cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.

The Cookie Policy & Control and Website Privacy Notice were updated on 13 August 2018.