Insulation

Tapered Roofing

Pembridge_meeting_people (9)
Kingspan Thermataper eliminates the need for a structural fall and offers a number of practical advantages to both specifiers and installers. The lightweight boards are easy to handle and are fitted with a dry installation process. This can greatly reduce project timescales when compared with wet approaches such as screed to fall which can take 195 days, or more, to dry.

In refurbishment applications, they can typically be installed above the existing roof surface (with a waterproof membrane), avoiding the time–consuming process of stripping the existing roof.
 

Tapered Roofing Service

Our tapered roofing service is your tried, tested and trusted partner for all things to do with tapered roof insulation. We are there for you, right from specification through to the build, with technical expertise you can count on. This ensures that the most cost effective solution for any problem is identified and that the end result is a roof which meets your specification for rainwater run-off and insulation requirements. And, as we also make all of the boards ourselves and design the system, we are there throughout the process ensuring quality, consistency and reliability.
 
During the early stages of your construction, our team is ready to provide you with a full quotation for your tapered roofing scheme within 48 hours. All you have to do is send us your roof plan and we’ll do the rest. Our quotations:
  • Include product information
  • Describe maximum thicknesses
  • Are designed to meet the required U-value
  • Detail roofing area and bonding area
  • Are valid for 90 days
Our tapered roofing service does not just end here. Our approach is to ensure we are available to help and advise architects and roofing contractors throughout the process, from initial thoughts through to installation. This includes:
  • Pre-contract exploratory meeting
  • On-site survey for refurbishment work
  • On-site pre-installation survey for new build work
  • Final phase check
Misc_tapered_render_UK

Thickness Savings

With a thermal conductivity of just 0.018 W/m.K, the Kingspan Kooltherm packer board helps to minimise the overall system thickness required to achieve a desired U–value. 

Typical thickness savings of 20 - 40 mm could be achieved, dependent on the individual scheme and build-up, when compared with a full Polyisocyanurate (PIR) system.

The lightweight boards are easy to handle and are fitted with a dry installation process. This can greatly reduce project timescales when compared with wet approaches such as screed to fall which can take 195 days, or more, to dry. In refurbishment applications, they can typically be installed above the existing roof surface (with a waterproof membrane), avoiding the time–consuming process of stripping the existing roof.

New Thinner Tapered Solutions

MiscPhoto_Tapered_01_UK
The Kingspan Thermataper TT44-K and Thermataper TT47-K roofing systems combine tapered insulation with a premium performance Kooltherm packer board, providing a slim solution for use on new and existing roofs with timber or concrete decks. 

Kingspan Thermataper TT44-K and Kingspan Thermataper TT47-K eliminate the need for a structural fall and offer a number of practical advantages to both specifiers and installers

Download the datasheet for more information.
 

Tapered Roof Insulation

CornerImage_TT46_UK.jpg

Tapered roof insulation for mechanically fixed waterproofing systems.

Thermataper TT46 LPC/FM
CornerImage_TT47_UK.jpg

Tapered roof insulation for bonded waterproofing systems.

Thermataper TT47 LPC/FM
CornerImage_TT44_UK.jpg

Tapered roof insulation for most partially bonded torch applied multi-layer bituminous waterproofing.

Thermataper TT44

CaseStudy_EmiratesAir_01_TT47_UK.tif

Flat roof drainage: Roofing best practice for the 21st century

We examined the cost analysis of the three standard options in a warm flat roof application across three different case studies of non-residential new builds, and discovered that using a tapered insulation system to achieve a U-value of 0.16 W/m²·K could be up to 26.9% cheaper than the alternative methods.

Find out more

Kingspan Insulation Ltd

For queries relating to insulation boards, cavity closers or membranes.

Pembridge

Leominster

Herefordshire

HR6 9LA

General enquiries: 01544 388 601

Technical advice: 01544 387 382

We use cookies on our website www.kingspan.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click "Accept and close" to accept the use of cookies on our website. If you do not click "Accept and close" but continue to use this website: you thereby consent to the use of all Kingspan's cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.

The Cookie Policy & Control and Website Privacy Notice were updated on 13 August 2018.