BML100.1 Hook-on

Overview

Our BML100.1 Hook-On Cassette (previouly supplied by Booth Muirie) is a secret-fix solution that can be installed in either a landscape or portrait orientation.

Available with hook-and-pin or hidden place variations of hook-on
Hidden-fixing, hook-on system removed the need for horizontal rail
Variable joint widths
Wind load calculation can be provided

Product Information

Product Overview

Product Dimensions

Materials

Colours & Coatings

Fire and Environmental

Downloads

BML100.1 Hook-on Cassette fix solution can be installed in either a landscape or portrait orientation .

The below face sizes are maximum standard sizes for aluminium. Larger sizes can be manufactured. Please contact KINGSPAN FACADE technical for further information on other sizes and materials

Metals available in BML100.1

Aluminium alloy 3103 H22 available in a factory applied post powder coated and anodised finish. Also grade 5005 H34/J57S as required.

Corten a weathered steel is a weather resistant steel created by alloying copper, chromium and nickel and adding phosphorous which makes the material best suited for aesthetic fascias. The top layer of the material reacts with atmospheric elements to form a rust coloured protective layer which not only makes the steel virtually maintenance free but also creates a striking aesthetic appearance.

Stainless Steel material is available in a large selection of patterned finishes allowing a large flexibility of design choice. The patterning process increases the strength and rigidity of metal enabling lighter gauges to be used.

Colour & Coatings Book

Download our colour book of high performance rainscreen facade finishes

Download PDF (6.4MB) Download PDF (6.4MB)

Fire

Aluminium with polyester powder coating is classified to EN13501-1/2: A2-s1,d0
Anodized aluminium is classified to EN13501-1: A1
A2 ACM Panel classification to EN13501—1/2: A2,s1,d0. (NB: this is the classification of the panel including skins and bonding agents) Category 1 in panel core fire performance screening tests
Corten is classified to EN13501-1:A1

Enviromental

Aluminium can be fully recycled and used for the production of new material.
Corten, rainwater run-off may cause staining due to the rainwater partially washing away the rusted surface. Therefore, special design and drainage consideration should be taken to ensure that the rain water run-off is channelled into a specific route to ensure that the contaminated rainwater does not cause any staining.