Kreate

Kreate install video

Variable panel sizes, cassette arrangement and colour options
Rapid installation
Panels up to 6000mm in length
Reduced Health & Safety risks due to less time spent working at height
All the advantages of a high performance insulated panel system
No façade fire stops required

Technical Details

Product Snapshot

Kreate

Integrating multiple aluminium cassettes on a single insulated panel, with a wide range of finishes and complete colour freedom. Individual cassettes on a panel can be finished in a different post-powder coating and in any BS or RAL colour of your choice and can vary in size. Architectural powder coating to Qualicoat standard or Qualicoat ‘Seaside’ standard.

Product Dimensions

Dimensions

Panel: Sizes are from 600mm width x 1200mm length to 1200mm width x 6000mm length.
Cassette: Sizes from 307mm width x 307mm length to 1174mm width x 3800mm length. Various sizes and colours can be used on any one panel.
Both the horizontal and vertical joints between each cassette / panel are 24mm and formed using an EPDM push-in gasket.

Product Weight & Thermal Performance

Note: The weight of a BENCHMARK Kreate panel is determined by the cassette design arrangement. Please contact the BENCHMARK Technical Department for further information.

Thermal Insulation
Kreate panels have a Thermal Transmittance (U-value), calculated using the method required by the Building Regulations Part L2 (England & Wales) and Building Standards Section 6 (Scotland), of:

*The core thickness is measured from the internal liner to the line of the cassettes. The insulation immediately behind the cassettes is not taken into account.

U - Value
Overall Thickness (mm)	104	124	174
Core Thickness (mm)	80	100	150
U-Value (W/m 2K)	0.26	0.21	0.13

Colours & Coatings

Fire Compliance & Environmental Ratings

Fire
Kreate panels are FIREsafe, and approved by the Loss Prevention Certification Board (LPCB) to LPS 1181 Grade EXT-B.

Panel Core
Kreate is ECOsafe with a polyisocyanurate (PIR) insulation core that contains no CFC’s or HCFC’s and has a low global warming potential.

Materials

Façade: The cassettes are manufactured from 2mm aluminium. Both vertical and horizontal joints between cassettes within each panel are also aluminium
Internal Liner - Coatings -
- Standard: polyester coating developed for use for the internal lining of insulated panels.
- Standard colour is “bright white” with an easily cleaned surface.
- Kingspan CLEANsafe: coating developed for use where the liner is exposed to foodstuffs and is regularly cleaned. Colour white.
- Kingspan AQUAsafe: coating for internal high humidity environments. Colour white.

Guarantee

Structural

Single Span Condition

Uniformly Distributed Loads kN/m² - Span L in metres
Panel Thickness (mm)	Load Type
80	Pressure	5.39	4.85	4.26	3.64	3.21	2.78	2.47	2.15	1.92	1.69	1.52
80	Suction	4.98	4.03	3.46	2.88	2.53	2.17	1.93	1.69	1.52	1.35	1.23
100	Pressure	5.39	4.85	4.48	4.10	3.83	3.56	3.35	2.96	2.67	2.37	2.15
100	Suction	5.36	4.78	4.10	3.42	3.00	2.57	2.29	2.00	1.80	1.60	1.46
150	Pressure	5.39	4.85	4.48	4.10	3.83	3.56	3.35	2.96	2.67	2.37	2.15
150	Suction	5.36	4.78	4.10	3.42	3.00	2.57	2.29	2.00	1.80	1.60	1.46

Double Span Condition

Uniformly Distributed Loads kN/m² - Span L in metres
Panel Thickness (mm)	Load Type
80	Pressure	5.39	4.85	4.48	4.10	3.67	3.23	2.77	2.30	2.01	1.71	1.52
80	Suction	4.98	4.03	3.46	2.88	2.53	2.17	1.93	1.69	1.52	1.35	1.23
100	Pressure	5.39	4.85	4.48	4.10	3.83	3.56	3.28	2.99	2.60	2.20	1.94
100	Suction	5.36	4.78	4.10	3.42	3.00	2.57	2.29	2.00	1.80	1.60	1.46
150	Pressure	5.39	4.85	4.48	4.10	3.83	3.56	3.28	2.99	2.60	2.20	1.94
150	Suction	5.36	4.78	4.10	3.42	3.00	2.57	2.29	2.00	1.80	1.60	1.46

Notes

For each value individual and combined load cases with appropriate load factors and temperatures have been considered.

Please contact the BENCHMARK Technical Department for details.
The table is for dark coloured panels.
The following deflection limits have been used:
Pressure Loading L/100
Suction Loading L/100
For intermediate values linear interpolation may be used.The actual wind suction load resisted by the panel is dependent upon the number of fasteners used and material of the rail. The fastener calculation should be carried out in accordance with the appropriate standard. For further advice please contact BENCHMARK Technical Services.
The allowable tolerance between bearing planes of adjacent supports is L/600, where L is the distance between supports.
Load span tables for spans outside of those shown are available from the BENCHMARK Technical Department.

Downloads

Kreate Product Data sheet

Download PDF (0.7MB) Download PDF (0.7MB)

Save page

Architectural Facade Systems

Save page

Kreate

Integrates multiple cassettes onto a single insulated panels. Each individual cassette can be a different colour and size.

Kreate

Kreate install video

Installation- as easy as 1,2,3!

1

2

3

Technical Details

Kreate

Dimensions

*The core thickness is measured from the internal liner to the line of the cassettes. The insulation immediately behind the cassettes is not taken into account.

Single Span Condition

Double Span Condition

Notes

Kreate Product Data sheet

Project details

Find us on social media

Contact us