Kooltherm K12 Framing Board

Download
Kooltherm K12 Product Wedge
Previous
Next

Insulation for Use Behind Wall Lining and Framed Walls

Kingspan Kooltherm K12 Framing Board is a super high performance, fibre-free rigid thermoset phenolic insulation, faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture. This reflective surface improves the thermal resistance of any cavity adjacent to the board.

  • CodeMark certified
  • Suitable for timber frame and steel frame wall constructions
  • Can eliminate cold bridging
  • Compliant with AS/NZS 4859.1

Product Data table
R-values
Specification Guide
Installation Instructions
CAD Drawings
Testing and Data Table
Product Data  
Thermal Conductivity (λ-Value) 0.021 W/m·K (Insulant Thickness 25 - 44 mm)
Emittance (Foil Face) E0.06
Product Thickness 25, 30, 40, 50 mm
Other thicknesses available upon enquiry. Minimum order quantities apply

Assumptions & Key

The R-values shown are Total R-values for the building element and are calculated in accordance with AS/NZS 4859.1 and NZS 4214. Kingspan Kooltherm products are manufactured, tested and packaged in conformance with AS/NZS 4859.1. The contribution of the product Total R-values depends on installation and environmental conditions.

Product R-values

                                      
 Product Thickness  Product R-value
 25 mm  R1.2
 30 mm  R1.4
 40 mm  R1.9
 50 mm  R2.5

System R-values

Click on the specific application types below to view their System R-values.

Concrete Wall (150 mm) / Block Wall (140 mm)

View System R-value

Brick Veneer Wall (External Side of Frame)

View System R-value

Steel / Timber-Framed Wall (External Side of Frame)

View System R-value
he wall insulation shall be CodeMark-certified Kingspan Kooltherm K12 Framing Board ______ mm thick, with a tested smoke obscuration of not more than 100 m2/kg, comprising a CFC/HCFC-free and zero Ozone Depletion Potential (ODP) rigid thermoset phenolic insulation core with composite foil facings on both sides manufactured under a management system certified to BS / I.S.EN ISO 9001:2008, BS / I.S.EN ISO 14001:2004 and BS / I.S. OHSAS 18001:2007 by Kingspan Insulation Limited and shall be installed in accordance with the instructions issued by them.

Handling & Storage

View Instructions

Concrete Wall (Clip/Channel System)

View Installation Instructions

Brick Veneer Wall (External Side of Frame)

View Instructions

Steel / Timber-Framed Wall (External Side of Frame)

View Instructions

CAD PDF - Brick Veneer Wall_Kooltherm K12

CAD PDF - Concrete Wall_Kooltherm K12

CAD PDF - Masonry Block Wall_Kooltherm K12

CAD PDF - Steel Framed Wall_Kooltherm K12

CAD PDF - Timber Framed Wall_Kooltherm K12

Management Standards

Standard Management System
BS / I.S. EN ISO 9001:2008 Quality Management
BS / I.S. EN ISO 14001:2004 Environmental Management
BS / I.S. OHSAS 18001:2007 Health and Safety Management

Product Testing

Characteristic Standard Result
Compressive Strength BS / I.S. EN 826:1996 Typically exceeds 100 kPa at 10% compression
Water Vapour Resistance BS EN 12086:1997 / I.S. EN 12086:1998 > 100 MN·s/g

Fire Performance

Test Test Method Result
Ignitability
Flame Spread
Heat Release
Smoke Release
AS 1530.3  0/0/0/0-1
Flame Propagation (AS 1366) AS 2122.1 Complies
Group Number AS ISO 9705 Group 2-S
Average Smoke Production Rate 0.67 m2s-1
(0-10 min)

Environmental Data Table

Recyclability Non-contaminated insulation site waste is recyclable, but there are currently no facilities in  Australia to process returned material
Re-usability Re-usable if removed with care (long term of service expected)
Water Use No water used in Kingspan Insulation's manufacturing process
Blowing Agent Global Warming  Potential (GWP) Manufactured with a blowing agent that has low GWP
Blowing Agent Ozone Depletion  Potential (ODP) Manufactured with a CFC/HCFC-free blowing agent that has zero ODP
Packaging Contains 0% recycled product
Polythene wrap and EPS skids 100% recyclable

Do you need help and advice on your project?

Our teams are dedicated to helping you make process as easy as possible and ensure you get the right materials for your needs.

Send Us An Enquiry

Contact Us

Kingspan Insulation Asia

We're ready to help. For any enquiries, call (+65) 981 35 498 or send an email to info@kingspaninsulation.asia

1 Commonwealth Lane

#07-26/27

Singapore

149544

(+65) 981 35 498

We use cookies on our website www.kingspan.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click "Accept and close" to accept the use of cookies on our website. If you do not click "Accept and close" but continue to use this website: you thereby consent to the use of all Kingspan's cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.

The Cookie Policy & Control and Website Privacy Notice were updated on 13 August 2018.