Evolution

QuadCore Evolution Axis

QuadCore Evolution Recess

QuadCore Evolution Multi Groove

QuadCore Evolution Reveal

QuadCore Evolution Reveal Recess

QuadCore Evolution Axis

QuadCore Evolution Axis is a highly streamlined, sleek unprofiled insulated panel system; the perfect solution if you are looking to achieve a minimalist façade on buildings with large flat surface areas. Smooth and flawless in appearance.
Length 1.8 to 17m, cover width 600 to 1000 - in 1mm (subject to MOQ) increments available 600/900/1000 standard sizes

QuadCore Evolution Recess

QuadCore Evolution Recess features depth and dimension through the folding of the panel edge and the insertion of a 10mm or 20mm gasket between the panels, creating a unique 3D effect.
Length 1.8 to 8m, cover width 600 to 1000 - in 1mm (subject to MOQ) increments available 600/900/1000 standard sizes.

QuadCore Evolution Multigroove

QuadCore Evolution Multi-Groove is a premium flat panel that has one or two grooves engineered into its surface, creating subtle shadow lines on the building’s façade and an illusion of smaller panel widths without the installation time constraints.
Length 1.8 to 17m, increments available 900 and 1000 standard sizes.

QuadCore Evolution Reveal

QuadCore Evolution Reveal allows for the creation of striking reveals through the installation of a standard panel. There are three reveal options to choose from: 50mm, 100mm and 150mm, creating a real contrast in depth. This system is completed using a steel omega section joint trim, which can be specified in the same colour as the
panel or in any other colour from the range.
Length 1.8 to 17m, cover width 600 to 1000 - in 1mm (subject to MOQ) increments available 600/900/1000 standard sizes.

QuadCore Evolution Reveal Recess

As the name suggests, QuadCore Evolution Reveal Recess is the combination of both QuadCore Evolution Reveal and QuadCore Evolution Recess. This is by far the most versatile product in the range, with a flexible reveal and a neat 3D recessed joint detail. QuadCore Evolution Reveal Recess ranges in widths of 600mm, 900mm and 1000mm.
Length 1.8 to 17m, increments available 600, 900 and 1000 standard sizes.

Corners and Curves

Curved elevations and neatly formed secret-fix corners are easily achieved with the QuadCore Evolution range.

Panels can be curved vertically and horizontally to create large sweeping elevations or used for more understated corner sections.

Panels can also be cranked and mitred to form internal or external corner units or to create depth to a boxed and recessed window detail.

Technical Details

Product Snapshot

The perfect solution for a minimalist façade effect, our perfectly flat insulated panel comes in a wide range of colours. QuadCore Evolution is a super smooth unprofiled insulated panel that can be laid vertically or horizontally and can integrate easily with other BENCHMARK and Kingspan products for complete design flexibility. Sleek and flawless in appearance, BENCHMARK Evolution Axis is available in 1mm width increments from 600mm to 1000mm.
The QuadCore Evolution range is equipped with an infinite array of surface textures, joint details, corner features and colours to ensure the desired effect is achieved. Furthermore, the panels can be mixed and matched, to create the ideal solution for use on any new build development, providing easy integration with existing structures for refurbishment projects.

Product Dimensions

Standard length is 1.8 to 12 metres. Panel lengths up to 17 metres are available. Panels less than 1.8 metres
long can be supplied and are subject to an extra charge. These panels cannot be end lapped.

1000m standard cover width.
Non-standard widths available are in between 600mm and 1000mm in 1mm increments. Non-standard cover widths are subject to minimum order quantities and extra charges. Please contact Benchmark quotations for
additional information.

Product Weight & Thermal Performance

Weight

Benchmark Evolution panel has an overall typical weight depending upon panel thickness:

Panel
Thickness (mm)	60	70	80	100	120	140	150
Weight (Kg/m²)	11.5	11.9	12.3	13.1	13.9	14.6	15.0

Thermal Insulation

(U value) calculated in compliance with Building Regulations Approved Documents L2A & L2B (England & Wales), Technical Handbooks Non-Domestic Sections 6 (Scotland), Part F2 (Northern Ireland) and Part L (Republic of Ireland - based on the Overall Heat Loss Method).
Panel

Panel
Thickness (mm)	60	70	80	100	120	140	150
U-value (W/m²K)	0.32	0.27	0.23	0.19	0.15	0.13	0.12

PLEASE NOTE:
For England and Wales; 0.26 W/m²K is the U-Value used for Notional Building Wall. This U-Value or better is recommended for compliance and can be seen as underlined in the above table. For Scotland; 0.27 W/m²K is the U-Value used for Notional Building Wall. This U-Value or better is recommended for compliance and can be seen as highlighted in bold in the above table.

Acoustics

All Benchmark Evolution Panels have a single figure weighted sound reduction Rw = 24dB.

Sound Reduction Index (SRI)
Frequency (Hz)	63	125	250	500	1k	2k	4k	8k
SRI (dB)	20	15	17	23	18	25	40	46

Colours & Coatings

Coatings - External Sheet
Kingspan Spectrum™
Reverse side of sheet coated with a light grey polyester coating.

Coatings - Internal Liner
Standard polyester coating developed for use for the internal lining of insulated panels. Standard colour is “bright white” with an easily cleaned surface.
Kingspan Cleansafe coating developed for use where the liner is exposed to foodstuffs and is regularly cleaned. Colour white.
Kingspan Aquasafe coating for internal high humidity environments. Colour white.

Reverse side of sheet coated with a light grey polyester coating.

Materials

Steel Substrate

S220GD+ZA hot-dip zinc/aluminium Galfan coated metal to BS EN10214: 1992.
Standard external sheet thickness 0.63mm, standard internal sheet thickness 0.4mm.

Fire Compliance & Environmental Ratings

The steel outer and inner facings have Class 1 surface spread of flame to BS476 - 7: 1987, and are Class 0,
as defined by Building Regulations.

We use cookies on our website www.kingspan.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click "Accept and close" to accept the use of cookies on our website. If you do not click "Accept and close" but continue to use this website: you thereby consent to the use of all Kingspan's cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.

The Cookie Policy & Control and Website Privacy Notice were updated on 13 August 2018.

Architectural Facade Systems

QuadCore Evolution

A super smooth unprofiled secret fix insulated panel that can be laid vertically or horizontally.

System Overview

QuadCore Evolution Axis

QuadCore Evolution Recess

QuadCore Evolution Multigroove

QuadCore Evolution Reveal

QuadCore Evolution Reveal Recess

Top hats

Evolution X Aluminium Top Hat No Insert

Evolution X Steel Top Hat Flush Insert

Evolution Z Aluminium Top Hat Recessed Insert

Evolution X Steel Top Hat Recessed Insert

Evolution Z Aluminium Top Hat Rubber Gasket

Corners and Curves

Technical Details

Weight

Thermal Insulation

Steel Substrate

Project details

Contact Us