Insulated Metal Panels

KS Series

Download
KS Micro-Rib QuadCore Intermediate Support KS Micro-Rib QuadCore Intermediate Support
Previous
Next
KS Micro-Rib QuadCore Intermediate Support
Greenguard_Gold_Red_List_Free_Material_Health_Silver_Certifications_Collage_NA
KS Mini Micro-Rib Intermediate Support Vertical
KS Azteco Outside Corner
KS Mini Wave Stack Joint
KS Micro-Rib QuadCore Intermediate Support

KS Series Wall Panel

KS Series insulated metal wall panels provide unique aesthetics through a wide range of profiles while delivering supreme thermal performance. Adjustable module widths can integrate for distinct architectural flair. KS Series panels can be customized with trimless ends and pre-formed corners to provide a clean, finished appearance.

Product Information

Product Specification
R-Value
QuadCore Testing
PIR Testing
Warranty
Colours
Sustainability
Profile Exterior: Flat, Micro-Rib, Mini Micro-Rib, Mini-Wave, Shadowline
Interior: Shadowline
Embossing Exterior:
  For flat: Azteco 
  For Micro-Rib, Mini-Wave, Shadowline: Stucco or non-embossed
  For Mini Micro-Rib: Non-embossed
Interior: Stucco or non-embossed
Gauge Exterior:
  For Shadowline: 26, 24, 22 ga
  For Azteco, Micro-Rib, Mini-Wave: 24, 22 ga
  For Mini Micro-Rib: 24 ga
Interior: 26, 24, 22 ga
Width 24”, 30”, 36”, 42”
Thickness 2”, 2.5”, 3”, 4”, 5”, 6”
Length 8’ - 53’
Reveal option Vertical: ⅛”
Horizontal: ⅛” or ⅜"
Orientation Vertical or horizontal
Post fabrication Trimless ends, folded corners available for all profiles except Mini-Wave (Manufacturing limitations apply. Please contact us for detailed information)
Insulation Core R-value
QuadCore Technology ≈ 8 per inch per ASTM C518 @ 75˚F
≈ 9 per inch per ASTM C518 @ 35˚F
PIR ≈ 7.2 per inch per ASTM C518 @ 75˚F
≈ 8.25 per inch per ASTM C518 @ 35°F

Only applies to QuadCore-equipped panels

Test Procedure Results
Fire FM-4880 Passed: Class 1 Fire Rating of Insulated Wall or Wall and Roof / Ceiling Panels, Interior Finish Materials or Coatings, and Exterior Wall Systems
FM-4882 Passed: Class 1 Interior Wall and Ceiling Materials or Systems for Smoke Sensitive Occupancies
ASTM E84 Flame Spread: 25 or Less / Smoke Developed: 50 or Less
CAN/ULC-S101 Fire Endurance Tests: 10 min
CAN/ULC-S102 Flame Spread: 20, Smoke Developed: 45 for panel with facings
CAN/ULC S138 Passed: Fire growth of foamed plastic insulated building panels in a full scale room configuration
CAN/ULC-S134 Passed: Standard method of test for fire of exterior wall assemblies
NFPA 259 Tested for potential heat of building materials
NFPA 285 Passed: Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components
Structural FM-4881 Passed: Class +110/-154 Zone H Class +100/-140 Zone HM – LM
ASTM E72 Vacuum chamber tested. Panel load / span and deflection tables are available
Thermal Transmission ASTM C518
Thermal Performance at 75°  
Thickness U-Factor R-Value
2 0.06 16.0
2.5 0.05 20.0
3 0.04 24.0
4 0.03 32.0
5 0.03 40.0
6 0.02 48.0
Air Infiltration ASTM E283 0.003 CFM/ft2 of Panel Area at 6.24 psf
Water ASTM E331 No uncontrolled water penetration at 20 psf differential pressure
AAMA 501.1 Dynamic water pressure testing – no sign of water leakage at 15 psf
Bond Strength ASTM D1623 Panels tested for tensile bond strength of metal to foam
Sample placed in an autoclave device and pressurized to 2 PSI at 212°F for 2½ hours
Skin Delamination  
No skin delamination with direct pull off pressure up to 1188 psf
Test Procedure Results
Fire FM-4880 Passed: Class 1 Fire Rating of Insulated Wall or Wall and Roof / Ceiling Panels, Interior Finish Materials or Coatings, and Exterior Wall Systems
ASTM E84 Flame Spread: 25 or Less / Smoke Developed: 450 or Less
CAN/ULC-S101 Fire Endurance Tests: 10 min and 15 min stayed in place
CAN/ULC-S102 Flame Spread: 5 / Smoke developed: 135 for panel with facings
CAN/ULC-S127 Flame Spread: <500 for foam core
CAN/ULC S138 Passed: Fire growth of foamed plastic insulated building panels in a full scale room configuration
CAN/ULC-S134 Passed: Standard method of test for fire of exterior wall assemblies
NFPA 259 Tested for potential heat of building materials
NFPA 268 Passed: Standard test method for determining ignitability of exterior wall assemblies
using a radiant heat energy source
NFPA 285 Passed: Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components
Structural FM-4881 Passed: Class +110/-154 Zone H Class +100/-140 Zone HM – LM
ASTM E72 Vacuum chamber tested. Panel load / span and deflection tables are available
Thermal Transmission ASTM C518
Thermal Performance at 75°   Thermal Performance at 35°
Thickness U-Factor R-Value Thickness U-Factor R-Value
2 0.07 14.4 2 0.06 16
2.5 0.06 18.0 2.5 0.05 20
3 0.05 21.6 3 0.04 24
4 0.03 28.8 4 0.03 32
5 0.03 36.0 5 0.03 40
6 0.02 43.2 6 0.02 48
Air Infiltration ASTM E283 0.003 CFM/ft² of Panel Area at 6.24 psf
Water ASTM E331 No uncontrolled water penetration at 20 psf differential pressure
AAMA 501.1 Dynamic water pressure testing – no sign of water leakage at 15 psf
Fatigue Cyclic test to positive and negative wind loading to ± L/180 deflection The panels exceeded 2 million alternate cycles without failure or damage wind loading to ± L/180 deflection wind loading to ± L/180 deflection
Bond Strength ASTM D1623 Panels tested for tensile bond strength of metal to foam
Skin Delamination   Sample placed in an autoclave device and pressurized to 2 PSI at 212 °F for 2½ hrs
No skin delamination with direct pull off pressure up to 1188 psf


Standard Material Workmanship & Standard Finish Warranties

At Kingspan, we understand the unique challenges that design and construction professionals face every day.  To do our part in meeting these demands, Kingspan products are offered with our team’s guidance and technical expertise, followed up after construction is completed with our product warranties:
 
  • 2 year standard material workmanship warranty
  • Up to 20 years standard finish warranty
 

QuadCore 30-Year Thermal Warranty

Only available on QuadCore-equipped panels

​The industry’s longest thermal performance warranty. The inimitable science behind QuadCore™ Technology and comprehensive independent third-party testing has delivered the industry an unparalleled 30-year thermal performance warranty.

Contact our sales or customer service departments for information regarding our optional warranty programs.
 

QuadCore_Kingspan_Warranty_Badge_NA

Download our QuadCore Warranty Document

Download PDF (0.1MB) Download PDF (0.1MB)
Insulated_panel_systems_colors
Planet Passionate
Through our new Planet Passionate 10-year groupwide sustainability program, we aim to make significant advances in the sustainability of our business and of our products.
 
Manufacturing Information  
Net Zero Energy Kingspan insulated panels are manufactured at our facilities in Deland, Florida; Modesto, California; Columbus, Ohio; Langley, British Columbia and Caledon, Ontario. By the end of 2020, 100% of the non-renewable operational energy used in manufacturing processes in these sites will be matched through the use of renewable energy and the purchase of renewable energy certificates (to offset any remaining non-renewable energy use). Visit our Kingspan Group website Net Zero Energy area to learn more.
Net Zero Carbon manufacturing Our groupwide aim is to achieve net zero carbon (CO 2 e) emissions (scope 1 & 2) from our manufacturing activities by the end of 2030. For more info, visit Planet Passionate.
Waste to Landfill Across our 5 North American sites, we sent send (54%) of our manufacturing waste to landfill. Our Planet Passionate goal is to send zero waste to landfill from those 5 site by 2030.
Rainwater harvesting  Our Planet Passionate goal is to achieve a total of 100 million litres of rainwater harvested groupwide by 2030.
Product Information  
Green Energy Ratings Kingspan is committed to supporting green rating systems such as LEED, the Living Building Challenge, Green Globes, BREEAM and the IGCC (International Green Construction Code – ASHRAE 189.1). Specification of effective systems and materials are key to achieving these certifications. With this in mind, Kingspan is providing a LEED v4 credits guide to assist the building team on how Kingspan Insulated Metal Panels may contribute to overall building performance and ratings requirements.
EPDs Kingspan Insulated Panel 3rd party verified product specifc EPD's by SCS for every product offered in North America.  To view our EPDs, please visit our certification page.
Recycled and/or renewable content (Pre Consumer): 17% recycled/renewable content
(Post Industrial): 14% recycled/renewable content
Kingspan can source steel coil with up to 80% recyceld content on request.
Re-use options Kingspan insulated technologies are durable, inert, do not rot and are resistant to moisture. In most cases, the panels are mechanically fixed to the structural frame and therefore can
be easily disassembled and separated from other construction materials. At the end of use phase, we would strongly advocate
for re-use of the panels. Insulated panels have been used at the end of their use phase for other applications.
End of Life solutions Where ‘complete system’ re-use is not possible, insulated panels can
be taken to a conventional shredder plant, which will separate the metal facings from the insulation core. The metal facings are then instantly available for re-use or re-sale. The foam insulation can be re-used when possible. Where re-use is not available, foam can be disposed of via registered ‘energy recovery’ incineration plants. Given long-term trends in raw material prices, landfill costs and future regulation, it is hoped that more recycling/recovery options will be developed and become economically viable in the near future. Industry is pro-actively exploring further options to divert end-of-life foam from landfill.
Recyclable packaging We are exploring both a ‘Packaging Service’ and bio based shipping materials for our customers to participate responsibly recovering Kingspan packaging waste on site in a sustainable way.
Services  
Site waste takeback programs A pilot program for site waste take-back is to be announced shortly.
Kingspan_KS_Series_Profile_Render_KSMR_KSMMR_KSAZ_KSMW_KSSL_NA

Featured Projects

11400_Steeles_Halton_Hills_ON_02_KSSL_KSOP_KSMR_CAN

Gateway Distribution Centre

Case study for Gateway Distribution Centre, Halton Hills, Ontario, Canada
141_Trade_Valley_Vaughn_ON_13_KSMR_KACM_CAN

141 Trade Valley

Case study for 141 Trade Valley, Vaughan, Ontario, Canada
Tim_Hortons_Field_Hamilton_ON_06_KSMR_CA

Tim Hortons Field

Case study for Tim Hortons Field, Hamilton, Ontario, Canada
Merrimack_University_North_Andover_MA_02_400W_KSAZ_US

Merrimack College

Case study for Merrimack College, North Andover, Massachusetts, USA
Sunwapta_Centre_Edmonton_AB_01_RESIZED_KSSL_KarrierFin_KSMFHF_CA

Sunwapta Centre

Case study for Sunwapta Centre, Edmonton, Alberta. Canada
Mattamy_National_Cycling_Centre_Milton_ON_02_KSMR_OP_CA

Mattamy National Cycling Centre

Case study of Mattamy National Cycling Centre, Milton, Ontario, Canada

Our KS Series is now available with QuadCore Technology

It's all in the gray cells - learn about the QuadCore difference here.
QuadCore_Cell_Icons_small_NA

Downloads

Insulated Panel Systems Product Portfolio

Download Download

Kingspan Blue Book Online Product Binder

Download Download

QuadCore Brochure

Download Download

Colour Chart

Download Download

Be Inspired Global Case Study Book

Download Download

KS Azteco Data Sheet

Download Download

KS Azteco QuadCore Data Sheet

Download Download

KS Micro-Rib Data Sheet

Download Download

KS Micro-Rib QuadCore Data Sheet

Download Download

KS Mini Micro-Rib Data Sheet

Download Download

KS Mini Micro-Rib QuadCore Data Sheet

Download Download

KS Mini-Wave Data Sheet

Download Download

KS Mini-Wave QuadCore Data Sheet

Download Download

KS Shadowline Data Sheet

Download Download

KS Shadowline QuadCore Data Sheet

Download Download

KS Series Weight Table

Download Download

KS Series Load Span Table

Download Download

KS Shadowline Load Span Table

Download Download

KS Series MasterFormat CSI Specification (DOC)

Download Download

KS Series MasterFormat CSI Specification (PDF)

Download Download

KS Series QuadCore Masterformat CSI Specification (DOC)

Download Download

KS Series QuadCore Masterformat CSI Specification (PDF)

Download Download

KS Series Horizontal CAD Details (DWG)

Download Download

KS Series Horizontal CAD Details (PDF)

Download Download

KS Series Vertical CAD Details (DWG)

Download Download

KS Series Vertical CAD Details (PDF)

Download Download

KS Series Installation Guide

Download Download

Environmental Product Declaration - PIR

Download Download

Environmental Product Declaration - QuadCore

Download Download

For the complete building envelope solution, consider these complementary products.

Maui_Brewing_Company_Maui_HI_06_KZ_300GS_US

Roof Panel Systems

Easy-to-install, low maintenance insulated roofing systems with superior thermal performance.

Learn More
Insulated_Panel_Systems_Accessories_landing_page_NA

Cladding Accessories & Components

Accessory components such as trims, insulated gutters and roof components can provide the vital finishing touch to any project.

Learn More

Support & Training

Technical Services Image_Spotlight Image__D_Aus

Technical Support

Our technical services team is here to assist you with advice and support on your next project.

Learn More
2017_UK_Website_Imagery_samples_services

Samples

Engage with our products directly. See them, touch them, trial them - order a sample today.

Learn More
AU_SSS_KingZip SF_Adelaide Convention Centre (38)

Installer Training

Practical training and discussions to accurately and safely install insulated metal panels.

Learn More
AIA_CEU_Presentation_Training_Cropped_NA

CEU Presentations

Kingspan offers a variety of CEU courses. Contact us to schedule a lunch and learn.

Learn More

Can we help or provide a sample?

Contact your local regional sales manager