KingZip Endlap Expanded KingZip Endlap Expanded

KingZip Insulated Standing Seam Roof Panel

KingZip insulated metal roof panels were designed with energy-efficiency, durability, and low maintenance in mind. As a single component roof system, KingZip greatly reduces on-site installation time compared to traditional multi-part roof systems. KingZip’s superior thermal and airtight design lowers buildings’ operational energy demands, and as a result, reduces its carbon footprint.

  • Vertical side seam and integral batten provide an attractive linear accept to any roofing application
  • Factory cutbacks at eaves and end laps available
  • Easily adaptable to accommodate safety and fall arrest systems
  • Available in thicknesses ranging from 2”- 6”, allowing for an R-value of up to 43
  • Available in Cool Roof® coatings, intended to reduce solar heat gain and improve energy efficiency
  • GREENGUARD Gold Certified

Product Information

Technical Information
Performance Testing & Approvals
Profile Exterior: Ribbed standing seam
Interior: Minor Rib or V-groove
Embossing Exterior: Stucco or non-embossed
Interior: Stucco or non-embossed
Gauge Exterior: 24, 22 ga
Interior: 26, 24, 22 ga
Width 42"
Thickness 2", 2.5", 3", 4", 5", 6"
Length 8' - 42' *
Reveal option N/A
Orientation N/A
Post fabrication Cutbacks, swaging
R-value ≈ 7.2 per inch per ASTM C518 @ 75˚F
≈ 8.25 per inch per ASTM C518 @ 35°F
* Consult a Regional Sales Manager for additional lengths.
Test Procedure Results
Fire FM-4880 Class 1 Fire Rating of Insulated Wall or Wall and Roof/Ceiling Panels,
Interior Finish Materials or Coatings, and Exterior Wall Systems
ASTM E84 Flame spread: 25 or Less, Smoke developed: 450 or Less
Wind Uplift Factory Mutual 4471 1-105 @ 5’0” spans with minimum 14 gauge roof purlins
1-60 @ 6’ spans with minimum 14 gauge roof purlins
UL 580 Class 90 uplift rating 5’0” spans with minimum 14 gauge purlins
UL 580 Class 90 uplift rating Panels attached to 20 gauge decking with 3’ o.c. fastening
Strength ASTM E72 Chamber Method Panel load / span and deflection tables are available
Thermal Transmission ASTM C518
Thermal Performance at 75°   Thermal Performance at 35°
Thickness U-Factor R-Value Thickness U-Factor R-Value
2 0.07 14.4 2 0.06 16
2.5 0.06 18.0 2.5 0.05 20
3 0.05 21.6 3 0.04 24
4 0.03 28.8 4 0.03 32
5 0.03 36.0 5 0.03 40
6 0.02 43.2 6 0.02 48
Air Infiltration ASTM E283 and ASTM E1680 0.003 CFM/ft2 of Panel Area at 6.24 psf
Water Penetration ASTM E331 and ASTM E1646 No Water Penetration at 20.0 psf
Fatigue Tests Subjected to 2 million alternate cycles of 20 PSF positive and negative wind loading No metal / foam delamination or metal fatigue
Humidity Test Sample subjected to 100% relative humidity at 140°F for 1000 hours No evidence of metal primer corrosion
Autoclave Test Sample placed in an autoclave device and pressurized to 2 PSI at 212 °F for 2½ hours No evidence of delamination
Skin Delamination   No skin delamination with direct pull off pressure up to 1188 psf

At Kingspan, we understand the unique challenges that design and construction professionals face every day.  To do our part in meeting these demands, Kingspan products are offered with our team’s guidance and technical expertise, followed up after construction is completed with our product warranties:

  • 2 year standard material workmanship warranty
  • Up to 20 years standard finish warranty
Contact our sales or customer service departments for information regarding our optional warranty programs.


Featured Projects


KingZip Brochure

Insulated Panel Systems Product Selector

Colour Chart

Be Inspired Global Case Study Book

KingZip Data Sheet

KingZip Weight Table

KingZip Span Table

KingZip MasterFormat CSI Specification (DOC)

KingZip MasterFormat CSI Specification (PDF)

KingZip CAD Details (DWG)

KingZip CAD Details (PDF)

KingZip Installation Guide

For the complete building envelope solution, consider these complementary products.

Support & Training

Can we help or provide a sample?