Water Tanks

Tap To Call: 1300 736 562

Mail

sales.au@kingspan.com
Phone

1300 736 562
Send Online Enquiry

3000 Litre Modline Water Tank

3000L Modline Water Tank
Previous
Next
3000L Modline Water Tank
Modline water tank 2

Suits A Small Household

Price: From $1900
Width: 800mm, Length: 2000mm, Height: 2020mm

Modline Water Tanks have flat ends, giving them greater capacities in a smaller footprint. A 3,000 Litre tank is good for 511 toilet flushes, 3 hours of hand watering, and 39 washing machine loads.

Trusted by thousands of Australian families to harvest rainwater for their home, our tanks are made to last using genuine Bluescope AQUAPLATE® Steel with a fully engineered internal stainless steel support frame.

We produce our high quality Modline Water Tanks locally in our Melbourne, Sydney, and Brisbane facilities for optimum precision and quality. Get a detailed quote including delivery to your property by clicking on the button below.
 

What You Can Do With 3000 Litres

Toilet Flushes Hand Watering Washing Machine Loads Weight
511 3 Hours 38 Loads 85 Kg
Note: These are estimates only

Features and Benefits

  • A trusted water tank manufacturer since 1934, previously known as TankWorks
  • Made with genuine Australian Bluescope AQUAPLATE® Steel, which is specifically designed for constructing water tanks.
  • Lined with a food grade polymer lining so that water never comes in contact with the steel
  • Fully engineered internal stainless steel support frame
  • Tanks meet Australian Standard AS4020 for storage of drinking water and carries Watermark certification
  • Wide range of Colorbond colours to choose from
  • Industry leading warranty –10 year construction warranty + 20 year warranty against corrosion

Quality Inclusions

  Inlets Outlet Overflow Valve
We include a generous number of quality inclusions to get you water tank going sooner. Below are some information on the default fitting positions which you can consider to suit your property.

Our friendly team will work with you to decide and confirm the best fitting positions before the production of your water tank begins.
2 x 400mm
inlet strainers with
light guards
Positions A & C		 1 x 25mm
fitted outlet with
watermarked ball valve
Position 6		 2 x 90mm
(100mm NSW only)
fitted overflows with
mosquito screen
Positions 6 & 12		 1 x 25mm
WaterMarked
Brass Ball Valve fitted to the Outlet

Colorbond Colour Range

Kingspan Water Colorbond Swatches

Brochure and Additional Information

Download Brochure
Installation & Delivery
Warranty
Modline Water Tanks Brochure Thumbnail

Kingspan Water Modline Water Tank Brochure 2019

Download PDF (1MB) Download PDF (1MB)
Delivery

Ensuring new water tanks arrive in perfect condition is important to us. Our professionally trained delivery staff will operate from purpose fitted trucks to position the tank on the prepared tank base. Please download the delivery information brochure to find out the details.
Kingspan Water Tank Delivery Thumbnail

Kingspan Water Delivery Information

Download PDF (0.1MB) Download PDF (0.1MB)
Tank Base Preparation

This brief guide for base preparation should be followed to ensure a correct foundation is laid for your AQUAPLATE® tank. Damage to your tank due to failure or movement of the tank base is not covered by the warranty. Please keep in mind that 1000L of water weighs 1000kg, and this is a significant force. Soft ground may subside under the weight of a full tank.

The base of your tank is made with double sided AQUAPLATE® i.e. the inside and outside of the tank base is coated with a polymer film to prevent corrosion. The tank may be in direct contact with the tank base and the tank will not corrode. Hence there is no reason to elevate the tank above ground level.

This base preparation guide should be taken as a guide only. Specific details on the construction of a tank base should be referred to an engineer for formal advice. Kingspan Water accept no responsibility for the failure of a tank base.
Kingspan Water Tank Base Preparation Thumbnail

Kingspan Water Tank Base Preparation

Download PDF (0.1MB) Download PDF (0.1MB)
Stand Concrete Paver Base Concrete Base Crusher Dust Base
Stand Base Stand Base Stand Base Stand Base
Stand construction must be certified as strong enough to support the tank’s weight. Consult a structural engineer to ensure the construction and footing is sufficient for the tank. The top of the stand must be flat, smooth and level. Tank stands may be made with varying leg lengths to accommodate a sloping site. Kingspan Water tank stands are available to suit a range of tanks. To use a concrete paver base, the area must be cleared down to firm earth. A paver base installed on soft ground (i.e. a garden bed) will subside over time, and is not advisable. Once dug down to a firm surface, spread sand and cement mix 75mm thick over the entire base, level out then proceed to place concretepavers flat on top. Once laid, shower the pavers with water to set the sand and cement off. Paver base is to be large enough to support all edges of the tank. Tank may be placed on to paver base straight away. Do not fill tank above 2 corrugations for at least 48 hours. A concrete slab base is the most suitable base for your AQUAPLATE® rainwater tank. Construction of a concrete base needs a minimum of 100mm thick concrete and F62 mesh, on a flat level area. If the tank is to be positioned in an area that is on a slope then the thickness of the slab is to be increased and the mesh to be a higher grade. The slab must be flat, smooth and level. Finish with a metal trowel is advisable. Slabs must be large enough to support all edges of the tank, and should be at least 100mm longer and wider than the tank. Slabs must be allowed to cure for at least five days prior to placing tank on slab. Crusher dust bases are only suitable for larger diameter round tanks. The crusher dust must have no particles larger than 5mm diameter. The crusher dust is to be 100mm thick. It must be compacted, level and flat. A border must be placed around the crusher dust to ensure it does not erode over time or is undermined by heavy rain or burrowing animals. The base should be large enough to support all edges of the tank. Tank may be filled straight away. Coarse aggregate should be spread over any exposed crusher dust, after the tank is positioned, to prevent erosion.

Note: Care must be taken when positioning the tank on a crusher dust base to ensure it does not dig in and create an uneven surface.
With a Kingspan tank, you can rest assured that you have support for the long term. Kingspan Environmental Pty Limited warrants the AQUAPLATE® range of steel water tanks as follows:
 
  • 20 year minimum life prior to perforation due to corrosion, as detailed in the AQUAPLATE® product warranty*.
  • 10 year construction warranty* covering the assembly and sealing of the tank.
*All our tanks come with a 10 year construction warranty and 20 year warranty against corrosion.

Refer to the Kingspan Environmental Terms & Conditions document and Warranty document for further information.
Kingspan Water Product Warranty Form Thumbnail

Kingspan Residential Tank Warranty Form

Download PDF (0.1MB) Download PDF (0.1MB)

Have questions about our Modline Water Tanks?

Get in touch with our friendly team and we'll happily guide you through any questions that you might have regarding our water tanks.

Contact Us

Contact Us

Kingspan Water & Energy Australia

Kingspan Water & Energy manufactures long-lasting water tanks in our quality-controlled manufacturing plants around Australia. For enquiries, please call 1300 736 562 or email sales.au@kingspan.com.

Head Office

3 Herbert Place, Smithfield

New South Wales

2164

Call: 1300 736 562

Email: sales.au@kingspan.com