4 Tips on avoiding condensation

16 January 2019 Kingspan Insulation Australia
Mould on Ceiling

Condensation is a serious issue effecting buildings around the world and you insulation could be the cause.

When you think of condensation you might think of an ice cold glass of lemonade on a hot summers day but it is much more than that. Condensation is a serious issue effecting buildings around the world and you insulation could be the cause.

When installing insulation in any building, it’s vital you know what type of insulation is best for your needs. Too many buildings are plagued with black mould, peeling and blistering paint, rotten timber structures, or rust and corrosion in the metal building materials hidden within the walls due to being poorly insulated.

Not only can condensation cause serious health problems, it can also cause your insulation to perform poorly, lowering its thermal performance and in some cases making it completely ineffective. Not to mention the big bill you are lumped with to rectify the damage. 

But there is good news; the risk of condensation can be reduced by simply ensuring you are using the right insulation for each application.

Below are four tips for choosing the right insulation and ensuring your insulation will continue to be effective for years to come, unaffected by the dangers of condensation.
 

Install insulation that is right for your climate.

There are many different climate zones throughout Australia and the extreme temperature variances make us more susceptible to the risks of condensation. Deciding between vapour permeable insulation which lets small amount of vapour through your insulation, or vapour barrier insulation which blocks the transfer of vapour, is important and should be discussed with your supplier or architect before you go ahead and install your chosen insulation.
 

Double-check BCA compliance

The Building Code is there for a reason and it is vital that you ensure the insulation you are using in your project is compliant. Ask your supplier to confirm the insulation you are using is suitable and compliant in the application you are working on. For further peace of mind, ask your supplier to carry out a Condensation Risk Analysis on the system. This will give you are clear idea of how the insulation will perform and how likely you are to be affected by condensation.


Pre-plan your ventilation

With the advancements in building methods, seals around windows and doors have improved, resulting in more air-tight buildings and reduced air flow. While this is great for energy efficient homes and lowering your energy costs, from a condensation point of it can make eliminating condensation harder. Be sure to run through your ventilation with your building designer, builder or architect when you are in the designing phase.
Pre-planned ventilation will save you the time, money and stress that comes with the results of condensation problems.
 

DIY Ventilation

If you find yourself in a home or building that has poor ventilation and is clearly suffering the effects of condensation, there are a number of things you can do in the short term to alleviate the problem. Using exhaust fans in bathrooms, laundries and kitchens will help extract some of the water vapour produced from the running of hot water and the operation of hot plates or dryers. Opening windows to allow air-flow through the building will also aid in lowering the build-up of moisture.
 

Window Condensation
Condensation is a very real risk that can cause major damage, but it is an avoidable problem. Making smart insulation choices before you build will prevent heartache down the track. You cannot look past a well-insulated home or property when it comes to handling condensation and the risk associated with it.
 
Kingspan Insulation offers a number of services to help you avoid condensation problems in your building. Comprehensive Condensation Risk Analysis (CRA) can be performed to give you an idea of how condensation will affect your building. Thermal Performance Calculations (TPC) are also available to provide you with details on how your building will perform thermally. Kingspan Insulation’s Technical Services department can provide expert advice and solutions for any building and will help you in designing the best building for your needs.
 

Kingspan Insulation Australia

Kingspan Insulation operates Australia wide. Contact us to find your local State Representative. For any enquiries, call 1300 247 235 or send an email to info@kingspaninsulation.com.au.

Head Office

266 Beringarra Avenue, Malaga

Western Australia

6090

Call: 1300 247 235

Fax: 1300 247 329

We use cookies on our website www.kingspan.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click "Accept and close" to accept the use of cookies on our website. If you do not click "Accept and close" but continue to use this website: you thereby consent to the use of all Kingspan's cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.