Contact Us

Mail

info@kingspaninsulation.com.au
Phone

1300 247 235
Send Online Enquiry

NEW Kooltherm K10 G2W White Soffit Board

Download
Kooltherm K10 White Product Wedge
Previous
Next
Kooltherm K10 White Product Wedge
Kooltherm K10 White insulation install

White-Faced Insulation for Concrete Soffits

Kingspan Kooltherm K10 G2W White Soffit Board is a high performance, fibre-free rigid thermoset closed cell phenolic insulation core, sandwiched between an upper tissue-based facing and a lower facing of white aluminium foil autohesively bonded to the insulation core during manufacture.

Kingspan Kooltherm K10 G2W White Soffit Board is manufactured without the use of CFCs/HCFCs and has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP).

  • Made in Australia
  • Attractive white finish
  • Group 2 NCC fire classification
  • CodeMark-certified for NCC compliance
 

Product Information

Download PDF Icon

Download Brochure (PDF)
Pricing and Where to Buy Icon

Pricing and Where to Buy
Request Technical Support and Calculation Icon

Request Technical Support
Register Specification Icon

Project Specific Warranty

Product Data
R-values
Specification Guide
Installation Instructions
CAD Drawings
Testing & Data Table
Thermal Conductivity (λ-Value) 0.021 W/m·K (Insulant Thickness 25 - 44 mm)
0.020 W/m·K (Insulant Thickness ≥ 45 mm)
Product Dimensions 2400 mm x 1200 mm (2.88 m2)
Please note that product dimensions have changed from previously 2270 mm x 1200 mm (2.72 m2)
Product Thickness 25, 30, 40, 50, 60, 70, 80, 90 mm 
K10FMG2 Render

Assumption and Key

The R-values shown are Total R-values for the building element as required by the Energy Provisions of the Building Code of Australia. Kingspan Kooltherm products are manufactured, tested and packaged in conformance with AS/NZS 4859.1.

The contribution of the product Total R-values depends on installation and environmental conditions. The R-value will be reduced in the event of the accumulation of dust on the upward facing surfaces and in those cavities that are ventilated.

Product R-values

View Product R-values

Concrete Roof (Soffit) - No Suspended Ceiling

View System R-value

Concrete Floor (Soffit) - Unenclosed Sub-Floor

View System R-value

Concrete Floor (Soffit) - Enclosed Sub-Floor

View System R-value

Kooltherm K10 G2W White Soffit Board Model Specification

You can also download the comprehensive model specification here.

Download DOC (0.3MB) Download DOC (0.3MB)
Specification Clause

Handling & Storage

View Instructions

Cutting and Taping

View Instructions

Concrete Soffit

View Installation Instructions

CAD PDF - Flat Concrete Roof Soffit_No Suspended Ceiling

Download Download

PSI - Kooltherm Range

Download PDF (0.2MB) Download PDF (0.2MB)

Management Standards

Standard Management System
ISO 9001:2015 Quality Management
ISO 14001:2015 Environmental Management
OHSAS 18001:2007 Health and Safety Management
ISO 50001:2011 Energy Management


Product Testing

Characteristic Standard Result
Compressive Stress AS 2498.3 Typically exceeds 100 kPa at 10% compression
Water Vapour Resistance BS EN 12086:1997 / I.S. EN 12086:1998 > 100 MN·s/g


Fire Performance

Test Test Method Result
Ignitability
Flame Spread
Heat Release
Smoke Release		 AS 1530.3  Spread of Flame Index: 0
Smoke Development ≤ 5
NCC Group Number AS ISO 9705 Group 2
Tested in accordance with AS/NZS 5637 as required by NCC 2016 Amdt.1
 
SMOGRARC AS ISO 9705 ≤ 100 m2/s2x1000


Environmental Data Table

Aspect Characteristic
Recyclability Non-contaminated insulation site waste is recyclable, but there are currently no facilities in Australia to process returned material
Re-usability Re-usable if removed with care (long term of service expected)
Water Use No water used in Kingspan Insulation's manufacturing process
Blowing Agent Global Warming Potential (GWP) Manufactured with a blowing agent that has low GWP
Blowing Agent Ozone Depletion Potential (ODP) Manufactured with a CFC/HCFC-free blowing agent that has zero ODP
Packaging Contains 0% recycled product
Polythene wrap and EPS skids 100% recyclable

Latest Case Studies

Karratha Health Campus WA Hero Image

Karratha Health Campus

Great Hospital for Good Country
Portsea Lifesaving Club

Portsea Surf Lifesaving Club

Kooltherm K3 Floorboard Insulation braves the harsh weather of Victorian coast
Medcar3

MedCar

MedCar showroom driven to perform

Do you need help and advice on your project?

Our teams are dedicated to helping you make process as easy as possible and ensure you get the right materials for your needs.

Contact Us

Contact Us

Kingspan Insulation Australia

Kingspan Insulation operates Australia wide. Contact us to find your local State Representative. For any enquiries, call 1300 247 235 or send an email to info@kingspaninsulation.com.au.

Head Office

25 Oherns Road,

Somerton, VIC

3062

Call: 1300 247 235

Fax: 1300 247 329