Kingspan Kooltherm K3 Floorboard is a high performance, fibre-free rigid thermoset closed cell phenolic insulation core, sandwiched between two layers of tissue based facing autohesively bonded to the insulation core during manufacture.
Kingspan Kooltherm K3 Floorboard is manufactured without the use of CFCs/HCFCs and has zero Ozone Depleting Potential (ODP) and low Global Warming Potential (GWP).
The thermal calculations are taken through the construction profile with 150 mm concrete slab and Kingspan Kooltherm K3 Floorboard.
Kingspan Kooltherm products are manufactured, tested and packaged in conformance with AS/NZS 4859.1.
The contribution of the product Total R-values depends on installation and environmental conditions.
You can also download the comprehensive model specification here
Installation should be in accordance with AS 3999:2015, Section 4 - Safety Requirements for Insulation Installation.
Un–reinforced floor screeds can be used in conjunction with Kingspan Kooltherm K3 Floorboard in most applications. However, where floor loads are to be excessive, please contact our Technical Services Department on 1300 247 235 or email firstname.lastname@example.org.
Kingspan Kooltherm K3 Floorboard is not recommended for use in direct contact with subsoil and must be used over a DPM. Where vertical slab edge insulation is required, the DPM should always be placed on the external face of the Kingspan Kooltherm K3 Floorboard.
Ensure boards are protected during installation from wheeled / foot traffic by using scaffold planks or other protective measures.
Kooltherm K3 Floorboard Insulation braves the harsh weather of Victorian coast
Insulation for use behind traditional and lightweight polymer modified renders
Rigid Cavity Wall Insulation
Insulation for concrete soffits
White Soffit Insulation Board
Insulated Fibre Cement Sheet For Concrete Soffits
Insulation for use behind wall lining and framed walls
Insulated dry-lining plasterboard for adhesive bonding
Insulated dry-lining plasterboard for mechanical fixing
Kingspan Insulation operates Australia wide. Contact us to find your local State Representative. For any enquiries, call 1300 247 235 or send an email to email@example.com.
25 Oherns Road,
Call: 1300 247 235
Fax: 1300 247 329