Kooltherm K10 PLUS Soffit Board

Download
Kooltherm K10 PLUS Product Wedge

Insulated Fibre Cement Sheet for Concrete Soffit

Kingspan Kooltherm K10 PLUS Soffit Board is a super high performance, fibre-free rigid thermoset, closed cell phenolic insulation core, sandwiched between a front facing fibre cement sheet and a reverse tissue  based facing autohesively bonded to the insulation core during manufacture.

Kingspan Kooltherm K10 PLUS Soffit Board is manufactured without the use of CFCs/HCFCs and has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP).

  • Made in Australia
  • Available in a range of selected lining materials
  • Non-combustible building board outer face
  • Group 1 BCA fire classification

Product Information

Product Data Table
R-values
Specification Guide
Installation Instructions
CAD Drawings
Testing and Data Table
Thermal Conductivity (λ-Value) Insulant 0.021 W/m·K (Insulant Thickness 25 - 44 mm)
0.020 W/m·K (Insulant Thickness ≥ 45 mm)
Fibre Cement 0.23 W/m·K (Fibre Cement thickness 6 mm)
Product Dimensions   2400 mm x 1200 mm (2.88 m2)
Other dimension available upon enquiry. Minimum order quantities apply.
Product Thickness   31, 36, 46, 56, 66 ,76, 86, 96 mm
Fibre Cement Sheet Thickness   6 mm

A selection of alternative lining boards to create customised finishes and facings is available. Please contact us for more information. 
Kooltherm K10 PLUS insulation R-value render

Assumption and Key

The R-values shown are Total R-values for the building element as required by the Energy Provisions of the Building Code of Australia. Kingspan Kooltherm products are manufactured, tested and packaged in conformance with AS/NZS 4859.1.

The contribution of the product Total R-values depends on installation and environmental conditions. The R-value will be reduced in the event of the accumulation of dust on the upward facing surfaces and in those cavities that are ventilated.

Product R-values

View Product R-values

Concrete Roof (Soffit) - No Suspended Ceiling

View System R-value

Concrete Floor (Soffit) - Unenclosed Sub-Floor

View System R-value

Concrete Floor (Soffit) - Enclosed Sub-Floor

View System R-value

Kooltherm K10 PLUS Model Specification

You can also download the comprehensive model specification here.

Handling & Storage

View Instructions

Cutting and Taping

View Instructions

CAD PDF - Flat Concrete Roof Soffit_No Suspended Ceiling

CAD DWG - Flat Concrete Roof Soffit_No Suspended Ceiling

Management Standards

Standard Management System
ISO 9001:2015 Quality Management
ISO 14001:2015 Environmental Management
OHSAS 18001:2007 Health and Safety Management
ISO 50001:2011 Energy Management


Product Testing

Characteristic Standard Result
Compressive Strength BS / I.S. EN 826:1996 Typically exceeds 100 kPa at 10% compression
Water Vapour Resistance BS EN 12086:1997 / I.S. EN 12086:1998 > 100 MN·s/g

For the puspose of calculation of condensation risk, the resistivity of the fibre cement sheet component of the product should be taken as 250 MN·s/g·m.


Fire Performance

Test Test Method Result
Ignitability
Flame Spread
Heat Release
Smoke Release
AS 1530.3  0/0/0/0-1*
Group Classification AS ISO 9705 Group 1**
Fire Propagation
Surface Spread of Flame
BS 476 Part 6
BS 476 Part 7
Class 0*** 
(in accordance with the Building Regulations in England, Wales and Northern Ireland)
Fire-resistance test of elements of construction AS 1530.4**** -/240/240
(HDPE pipe)
*Applies only to the Kingspan Kooltherm K10 Insulation board used in the manufacture of this composite insulated fibre cement product.
** Applies only to the compliant fibre cement facing.
*** Applies only to the Kingspan Kooltherm Insulation core.
**** Testing to AS 1530.4 for the Kingspan Kooltherm K10 FM performed in accordance with NCC BCA C3.15 Opening for service penetrations using a 120 mm concrete soffit.


Environmental Data Table

Aspect Characteristic
Recyclability Non-contaminated insulation site waste is recyclable, but there are currently no facilities in Australia to process returned material
Re-usability Re-usable if removed with care (long term of service expected)
Water Use No water used in Kingspan Insulation's manufacturing process
Blowing Agent Global Warming Potential (GWP) Manufactured with a blowing agent that has low GWP
Blowing Agent Ozone Depletion Potential (ODP) Manufactured with a CFC/HCFC-free blowing agent that has zero ODP
Packaging Contains 0% recycled product
Polythene wrap and EPS skids 100% recyclable

Latest Case Studies

Do you need help and advice on your project?

Our teams are dedicated to helping you make process as easy as possible and ensure you get the right materials for your needs.

Contact Us

Contact Us

Kingspan Insulation Australia

Kingspan Insulation operates Australia wide. Contact us to find your local State Representative. For any enquiries, call 1300 247 235 or send an email to info@kingspaninsulation.com.au.

Head Office

266 Beringarra Avenue, Malaga

Western Australia

6090

Call: 1300 247 235

Fax: 1300 247 329

We use cookies on our website www.kingspan.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click "Accept and close" to accept the use of cookies on our website. If you do not click "Accept and close" but continue to use this website: you thereby consent to the use of all Kingspan's cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.