Evolution

Evolution has 3 variations of unprofiled insulated panel

Evolution Axis

Evolution Recess

Evolution Multi Groove

Evolution Axis

Evolution Axis is a highly streamlined, sleek unprofiled insulated panel system; the perfect solution if you are looking to achieve a minimalist façade on buildings with large flat surface areas. Smooth and flawless in appearance.

Length: 2.0 to 12m
Width: 600, 900mm and 1000mm
Compliance route on external walls: Deemed to Satisfy for Type C construction. Performance Solution required for Type A & B construction.
Fire Approvals: AS5113 "EW" Classified System Available, FM 4881 approved
Product compatibility: All profiles integrate with each other
Pre-formed corners and panels: Panels can be curved on the length or width, corners can be cranked or mitred depending on profile
Thermal Performance: AS/NZS 4859.1:2018 compliant
Cyclone Rating: Cyclone and Impact tested for Wind Regions C & D

Evolution Recess

Evolution Recess features depth and dimension through the folding of the panel edge and the insertion of a 10mm or 20mm gasket between the panels, creating a unique 3D effect.

Length: 2.0 to 8m
Width: 600mm, 900mm and 1000mm
Cyclone Rating: Cyclone and Impact tested for Wind Regions C & D

Evolution Multi-Groove

Evolution Multi-Groove is a premium flat panel that has one or two grooves engineered into its surface, creating subtle shadow lines on the building’s façade and an illusion of smaller panel widths without the installation time constraints.

Length: 2.0 to 12m
Width: 600mm, 900mm and 1000mm
Compliance route on external walls: Deemed to Satisfy for Type C construction. Performance Solution required for Type A & B construction.
Fire Approvals: AS5113 "EW" Classified System Available, FM 4881 approved
Product compatibility: All profiles integrate with each other
Pre-formed corners and panels: Panels can be curved on the length or width, corners can be cranked or mitred depending on profile
Cyclone Rating: Cyclone and Impact tested for Wind Regions C & D

Technical Information

Dimensions & Weights

Data Sheet

Install Guide

CAD Details

Fire

Acoustics

Colours

Cyclone Testing

Sustainability

Environmental Product Declaration (EPD)

Core Thickness (mm)	50	80	100	140
Weight (kg/m²) 0.7 steel / 0.4 steel	12.7	13.9	14.7	16.3

Kingspan KS1000EVO Evolution Datasheet

Download Download

BENCHMARK Evolution Axis-Multigroove-Recess Installation Guide Horizontally Laid

Download Download

BENCHMARK Evolution Axis-Multigroove-Recess Installation Guide Vertically Laid

Download Download

BENCHMARK Evolution CAD Detail Axis Panel Horizontally Laid

Download Download

BENCHMARK Evolution CAD Detail Axis Panel Vertically Laid

Download Download

BENCHMARK Evolution CAD Detail Recess Panel Vertically Laid

Download Download

BENCHMARK Evolution CAD Detail Recess Panel Horizontally Laid

Download Download

AS5113 "EW" Classified System

1000mm Evolution Axis wall panel has been tested to BS 8414-2 and achieves AS5113 "EW" Classification

To find out more about Kingspan's BS8414 tested systems visit here

When tested to AS/NZS 1530.3, BENCHMARK Evolution panels achieved the following fire hazard results;

Ignitability Index	0
Spread of Flame index (SFI)	0
Heat evolved index	0
Smoke development index	2

BENCHMARK Evolution panels meet the requirements of BCA Specification C1.10a as a group 2 product when tested to AS ISO 9705.

Kingspan Fire Regulations Brochure

We take a look at the current regulations in Australia regarding Fire and show how Kingspan Panels meet these regulations

Download PDF (8.3MB) Download PDF (8.3MB)

For sound transmission reduction, panels typically have a single figure weighted sound reduction index (SRI) of Rw = 24dB. For specific acoustic solutions contact BENCHMARK Technical Services.

Fr	63	125	250	500	1K	2K	4K	8K
SRI	20	15	17	23	18	25	40	46

BENCHMARK Evolution is available in a range of selected colours from the BENCHMARK Colour Chart. Please contact BENCHMARK Customer Service for further advice.

Kingspan have carried out cyclonic wind testing on the Evolution Panel in accordance with the requirements of the BCA B1.2 for low-high-low performance requirement up to 15 kPa. Impact testing has also been carried out to satisfy the requirements of AS1170.2-2011 where applicable (Clause 2.5.7 Impact from Windborne Debris).

For further details please contact Kingspan Technical Services.

Planet Passionate Kingspan Insulated Panels

Through our new Planet Passionate 10-year groupwide sustainability programme, we aim to make significant advances in the sustainability of our business and of our products.

KIP Wall Panels Environmental Product Declaration (EPD)

Download Download

Evolution Wall Panels (KS1000 EVO)
Declared Thermal Conductivity (λ Value) 0.022 W/m.K @23°C
Panel Nominal Thickness (mm)	Product R-Value (m²K/W) at 23°C	Product U-Value (W/m²K) at 23°C	Total R-Value (m²K/W)
Panel Nominal Thickness (mm)	Product R-Value (m²K/W) at 23°C	Product U-Value (W/m²K) at 23°C	Heat Flow Out (Winter)	Heat Flow In (Summer)
50	2.24	0.45	2.50	2.31
80	3.68	0.27	4.01	3.70
100	4.61	0.22	4.98	4.59
140	6.47	0.15	6.92	6.38
Total R-Values for the building element as required by the Energy Provisions of the National Construction Code, calculated in accordance with AS/ NZS 4859.2 2018. KS1000 EVO is manufactured, tested and packaged in conformance with AS/NZS 4859.1 :2018
Declared Product R-Value is calculated in accordance with AS/NZS 4859.1:2018 as required for compliance to the National Construction Code 2019.

Fast track, single component installation

The perfect solution for a minimalist façade, Evolution has the aesthetic appeal of a super-smooth aluminium rainscreen façade with the added value of an insulated panel. Laid vertically or horizontally panels integrate easily with other Kingspan products and are available in a wide range of colours and surface textures.

Corners and Curves

Curved elevations and neatly formed secret-fix corners are easily achieved with the Evolution range.

Panels can be curved vertically and horizontally to create large sweeping elevations or used for more understated corner sections.

Panels can also be cranked and mitred to form internal or external corner units or to create depth to a boxed and recessed window detail.